|Table of Contents|

Influence of Gatling Gun Recoil on Bolt Group Transmission System

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

Issue:
2012年06期
Page:
0-
Research Field:
Publishing date:

Info

Title:
Influence of Gatling Gun Recoil on Bolt Group Transmission System
Author(s):
XU JianBO Yucheng
Electromechanical Engineering College,North University of China,Taiyuan 030051,China
Keywords:
gatling gunsrecoilbolt groupstransmission systemscam curve slotsmain rollers
PACS:
TJ301;TJ391
DOI:
-
Abstract:
To improve the performances of gatling guns,the influences of their recoil motions on bolt group transmission systems are researched.Three statuses of the receiver cam curve slot and the bolt group main roller are analysed,and the bolt group main roller’s motion differential equation is expressed according to the principle of momentum moment.The viewpoint of erossover shock and inverse transfer motion in advance is presented considering the precondition of the recoil motion.Gatling guns’s acceleration and deceleration process;the cam curve’s wear is produced by the driving pressure force of transmission and the frequent brake and rotary fast direction changing.

References:

[1]张策.机械动力学[M].北京:高等教育出版社,2002:80-81,139-140.
[2]尤国钊.自动武器设计[M].北京:国防工业出版社,1992:224-225.
[3]徐健,薄玉成,常学芳.超高射速转管机枪凸轮曲线槽分析与改进[J].火炮发射与控制学报,2007,28(4):43-46. Xu Jian,Bo Yucheng,Chang Xuefang.Analysis and improvement for cam curve groove for superhigh fire rate gatling gun[J].Journal of Gun Launch and Control,2007,28(4):43-46.
[4]Camara,Amara,Han Xuli.Approximation of the curves by bspline[J].Mathematical Theory and Application,2002,22(3):40-43. 
[5]Yan H S,Tsei M C,Hsu M H.A variablespeed method for improving motion characteristics of camfollower system[J].ASME Journal of Mechanical Design,1996,116(118):6-8.
[6]廖振强,耿光有,卜雄洙,等.转管机枪连发射击两自由度数学模型[J].兵工学报,2000,21(8):62-65. Liao Zhenqiang,Geng Guangyou,Bu Xiongzhu,et al.A mathematical model of two independent variables for the repeated firing process of a gatling gun[J].Acta Armamentarii,2000,21(8):62-65.
[7]王惠源.含间隙转管武器动力学研究与实验分析[D].太原:中北大学机电工程学院,2005:80-120.
[8]徐健,薄玉成,李强,等.高速反圆柱凸轮机构滚轮动力学分析[J].火炮发射与控制学报,2008,29(3):60-63. Xu Jian,Bo Yucheng,Li Qiang,et al.Roller dynamics analysis for high speed inverse cylinder cam mechanism[J].Journal of Gun Launch and Control,2008,29(3):60-63.
[9]薄玉成,徐健,李强,等.高速反圆柱凸轮机构滚轮纯滚动动力学分析[J].火炮发射与控制学报,2008,29(4):97-99. Bo Yucheng,Xu Jian,Li Qiang,et al.Dynamics analysis on roller’s pure rolling of high speed inverse cylinder cam mechanism[J].Journal of Gun Launch and Control,2008,29(4):97-99.
[10]郝秀平,薄玉成,杨臻.某转管机枪缓冲器设计与仿真[J].华北工学院学报,2003,24(3):230-232. Hao Xiuping,Bo Yucheng,Yang Zhen.A design and imitation of the buffer used in rotating barrels machine gun[J].Journal of North China Institute of Technology,2003,24(3):230-232.
[11]戴成勋,朵英贤,靳天佑.自动武器设计新编[M].北京:国防工业出版社,1990:81-108.
[12]郑建荣.ADAMS虚拟样机技术入门与提高[M].北京:机械工业出版社,2004:49-51.

Memo

Memo:
-
Last Update: 2012-12-29