|Table of Contents|

Size effect of aggregate in resin mineral composite based on fractal gradation

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

Issue:
2013年04期
Page:
597-
Research Field:
Publishing date:

Info

Title:
Size effect of aggregate in resin mineral composite based on fractal gradation
Author(s):
Wang Tao12Zhang Jianhua12Hao Shimei12Ren Xiuhua12He Xufeng3
1.Key Laboratory of High Efficiency and Clean Mechanical Manufacture,Ministry of Education; 2.School of Mechanical Engineering,Shandong University,Jinan 250061,China; 3.Engineering and Technology Research Institute,NUST,Nanjing 210094,China
Keywords:
resin mineral composite aggregate gradation size effect fractal theory
PACS:
TH145.9; TB332
DOI:
-
Abstract:
Aggregate is the key component in resin mineral composite(RMC)to bear loads and its gradation design and size effect corresponding to different aggregate dimension determines the mechanical properties of RMC.An optimal method to determine the critical dimension of screen holes is proposed based on the particle interference theory.A fractal method is adopted to adjust the corresponding proportion of each component in order to form an effective evaluation parameter of aggregate size effect.A simplified micro-stress transfer model of aggregate is established.The variation tendency of frame strength is acquired by simulation.The compressive strength of the representative RMC samples is measured to validate the aforementioned assumptions.Experimental results of aggregate gradation are consistent with the simulation results.Increasing aggregate dimension reasonably can not only improve the mechanical properties of the RMC,but also decrease the usage amount of resin effectively.

References:

[1] 胡果明,张绍勇,周倜.树脂混凝土在机床基础件上的应用[J].机床,1993(10):8-10.
Hu Guoming,Zhang Shaoyong,Zhou Ti.Application of resin concrete on machine tool structures[J].Machine Tools,1993(10):8-10.
[2]钱元,张点,周光明,等.碳-玻纤维混杂正交三向复合材料力学性能研究[J].南京理工大学学报,2012,36(1):158-164.
Qian Yuan,Zhang Dian,Zhou Guangming,et al.Investigation of mechanical properties for three-dimensional orthogonal woven glass-carbon hybrid composites[J].Journal of Nanjing University of Science and Technology,2012,36(1):158-164.
[3]陈龙淼,钱林方,徐亚栋.树脂基复合材料身管热性能改良分析[J].南京理工大学学报,2005,29(3):253-256.
Chen Longmiao,Qian Linfang,Xu Yadong.Improvement analysis of thermal characteristics for composite barrel with resin matrix[J].Journal of Nanjing University of Science and Technology,2005,29(3):253-256.
[4]龚建清.超高性能混凝土的级配效应研究[D].长沙:湖南大学材料科学工程学院,2007.
Gong Jianqing.Study on grading effects of ultra-high performance concrete[D].Changsha:Hunan University,2007.
[5]王立久,刘慧.基于分形理论嵌挤结构级配设计的研究[J].武汉理工大学学报,2009,33(5):856-859.
Wang Lijiu,Liu Hui.Studies on multilevel stone-stone frame aggregate grading design based on fractal theory[J].Journal of Wuhan University of Technology,2009,33(5):856-859.
[6]王慊源,胡京爽.混凝土集料级配与分形[J].岩土力学,1997,18(3):93-100.
Wang Qianyuan,Hu Jingshuang.Gradings of the concrete aggregates and fractals[J].Rock and Soil Mechanics,1997,18(3):93-100.
[7]杨瑞华,许志鸿,张超,等.沥青混合料分形级配理论[J].同济大学学报,2008,36(12):1642-1646.
Yang Ruihua,Xu Zhihong,Zhang Chao,et al.Fractal gradation theory of asphalt mixture[J].Journal of Tongji University,2008,36(12):1642-1646.
[8]Potyondy D O.Simulating stress corrosion with a bonded-particle model for rock[J].International Journal of Rock Mechanics and Mining Sciences,2007,44(5):677-691.
[9]吴其俊,周克栋,赫雷,等.连续损伤力学在复合材料厚壁圆筒渐进破坏分析中的应用[J].南京理工大学学报,2011,35(4):479-483.
Wu Qijun,Zhou Kedong,He Lei,et al.Progressive failure analysis of composite thick-wall cylinder using continuum damage mechanics[J].Journal of Nanjing University of Science and Technology,2011,35(4):479-483.

Memo

Memo:
-
Last Update: 2013-08-31