|Table of Contents|

Elastic-plastic contact deformation of precise ball screw pair in overload condition

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

Issue:
2014年02期
Page:
192-198
Research Field:
Publishing date:

Info

Title:
Elastic-plastic contact deformation of precise ball screw pair in overload condition
Author(s):
Zhao Guoping1Fan Yuanxun2Luo Xiangyin2Li Liyi1
1.School of Electrical Engineering and Automation,Harbin Institute of Technology,Harbin 150001,China; 2.School of Mechanical Engineering,NUST,Nanjing 210094,China
Keywords:
ball screw pairs elastic-plastic deformation finite element analysis contact theory
PACS:
TH132.1
DOI:
-
Abstract:
According to the load and the working characteristics of the precise balls crew pair under short-time overload,the theoretical calculation of the non-linear elastic-plastic contact deformation of the single-nut ball screw pair with overload is discussed by using the Hertz point contact theory and the elastic-plastic deformation theory.The finite element analysis model based on ABAQUS software is established considering the different force on balls in each circle.The theoretical calculation and the finite element analysis are made respectively for the contact stress and the elastic-plastic contact deformation of screw pairs.The results show that the contact plastic deformation is far less than the elastic deformation in the ball screw.By analyzing the real plastic deformation on the ball screw after bore over-load,the finite element analysis results verify the accuracy of the theoretical calculation.

References:

[1] 程光仁,施祖康,张超鹏.滚珠螺旋传动设计基础[M].北京:机械工业出版社,1987.
[2]张洪国.滚珠丝杠传动副的接触力学模拟与静动态特性分析[D].长春:吉林大学机械科学与工程学院,2011.
[3]李凌丰,罗容.大负荷滚珠丝杠副中滚珠接触应力研究[J].中国机械工程,2009(18):2248-2251.
Li Lingfeng,Luo Rong.Study on ball's contact stress in high-load ball screw[J].Mechanics Engineering in China,2009(18):2248-2251.
[4]Claudio Braccesi,Luca Landi.A general elastic plastic approach to impact analysis for stress state limit evaluation in ball screw bearings return system[J].International Journal of Impact Engineering,2007,34:1272-1285.
[5]罗相银.高过载工况下滚珠丝杠副的极限承载能力及伺服加载试验台的研究[D].南京:南京理工大学机械工程学院,2013.
[6]宋现春,姜洪奎.高速滚珠丝杠副弹性变形的有限元分析[J].北京工业大学学报,2009,35(5):582-585.
Song Xianchun,Jiang Hongkui.Analysis of elastic deformation for high speed ball screw based on the finite element method[J].Journal of Beijing University of Technology,2009,35(5):582:585.
[7]Tamaki A.Elements for ultra-high speed/low noise linear motion table[J].Mechanical Automation,1993,25(3):42-44.
[8]万长森.滚动轴承的分析方法[M].北京:机械工业出版社,1985.
[9]Harris T A,Kotzalas M N.滚动轴承分析[M].罗继伟,马伟,译.北京:机械工业出版社,2009.
[10]徐秉业,刘信声.应用弹塑性力学[M].北京:清华大学出版社,2007.
[11]Izawa M,Shimoda H.Study on the load distribution in the ball screw[J].Japan Journal of Precision Machine,1976,42(11):1021-1028.
[12]Xue Songmei.Study on the load distribution of ball screw with errors[J].Mechanism and Machine Theory,2003(38):1258-1268.
[13]张陈灵.高过载工况下滚珠丝杠副的接触变形与刚度分析[D].南京:南京理工大学机械工程学院,2013.
[14]徐灏.机械设计手册(第2卷)[M].第2版.北京:机械工业出版社,2010.

Memo

Memo:
-
Last Update: 2014-04-30