|Table of Contents|

Bending of bilateral butt joints using progressive damage model

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

Issue:
2014年04期
Page:
464-469
Research Field:
Publishing date:

Info

Title:
Bending of bilateral butt joints using progressive damage model
Author(s):
Shi Xiaohong1Chen Haili2Zhou Guangming2Wang Xinfeng2Feng Weichao2
1.The Sixtieth Institute of the Headquarters of the General,Nanjing 210016,China; 2.State Key Laboratory of Mechanics and Control of Mechanical Structures,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China
Keywords:
composite joints bending strength progressive damage overlap parameters
PACS:
TB332
DOI:
-
Abstract:
In order to study the influence of overlap length and thickness on the bending of bilateral butt joint,the software Abaqus is used for the progressive damage analysis.The method is built based on the three-dimensional progressive damage analysis(PDA)and the cohesive zone model(CZM).The constitutive equations for composite programmed by User-defined Material Mechanical Behavior(UMAT)subroutine and Cohesive Contact method are used to simulate respectively the damage progression in composites and that in the adhesive interface.The bending strength and damage process of joints are obtained.The results show,the strength of joints can be increased with the increase of the overlap length and may change little when the length reaches a definite value.But its strength increases at the beginning and decreases with increasing the overlap thickness.The results can provide reference material for the design of joints during bending.

References:

[1] 王孝慧,姚卫星.复合材料胶接结构有限元分析方法研究进展[J].力学进展,2012,42(5):562-571.
Wang Xiaohui,Yao Weixing.Progress in research on FEA models of adhesively bonded composite joints[J].Advances in Mechanics,2012,42(5):562-571.
[2]钱元,周光明,贺卫东,等.轻质复合材料发射箱盖结构设计与参数优化[J].航空学报,2013,33(4):826-832.
Qian Yuan,Zhou Guangming,He Weidong,et al.Structure design and parameter optimization of lightweight composite canister cover[J].Acta Aeronautica et Astronautica Sinica,2013,33(4):826-832.
[3]方金福,叶宁武,单俊杰.抗坠毁燃油系统易碎件及吸能保护件的研究[J].直升机技术,2011,166(1):10-13.
Fang Jinfu,Ye Ningwu,Shan Junjie.Study of breakable and protective attachment for helicopter crashworthiness fuel system[J].Helicopter Technique,2011,166(1):10-13.
[4]Baccouche M R,Belwafa J E,O'Connor C S,et al.Frangible connecting member for a vehicle[P].American:CN103204183A.2013-07-17.
[5]鞠苏,曾竟成,江大志,等.碳纤维增强复合材料接头研究进展[J].高科技纤维与应用,2006,31(3):29-35.
Ju Su,Zeng Jingcheng,Jiang Dazhi,et al.Study progress in carbon fiber reforced composite joint[J].Hi-Tech Fiber & Application,2006,31(3):29-35.
[6]吉法祥,魏焕曹.复合材料中界面特性与力学强度的关系[J].南京理工大学学报,1992,16(5):63-67.
Ji Faxiang,Wei Huancao.The relation between the interface and mechanical strength in the filling particles composite material[J].Journal of Nanjing University of Science and Technology,1992,16(5):63-67.
[7]刘君伍,黄建云.复合材料胶接接头传载能力分析[J].纺织高校基础科学学报,2008,21(1):113-116.
Liu Junwu,Huang Jianyun.Analysis of maximum load of adhesively bonded composite joints[J].Basic Sciences Journal of Textile Universities,2008,21(1):113-116.
[8]吴代华,晏石林.有拉-弯耦合效应时复合材料接头的胶层应力分析[J].武汉工业大学学报,1989(2):233-241.
Wu Daihua,Yan Shilin.Analysis of adhesive stress in composite joints with tension-bending coupling effects[J].Journal of Wuhan University of Technology,1989(2):233-241.
[9]赵波.考虑弯曲效应的混元胶接单搭接头应力模型[J].机械工程学报,2008,44(10):129-137.
Zhao Bo.Theoretical stress model of mixed-modulus single-lap adhesive bonded joints considering the bending effects[J].Chinese Journal of Mechanical Engineering,2008,44(10):129-137.
[10]王雅娜,赵丽滨.复合材料单搭接胶接接头弹性与弹塑性分析比较研究[A].北京力学会第19届学术年会论文集[C].北京:北京力学会,2013:242-243.
Wang Yana,Zhao Libin.The analysis of elasticity and elastic-plastic mechanics of composite single-lap joints[A].The 19th Beijing Aademic Conference of Theoretical and Applied Mechanics[C].Beijing:The Beijing Society of Theoretical and Applied Mechanics,2013:242-243.
[11]赵波,吕振华,吕毅宁.单搭接胶接接头应力分析的解析解[A].2010北京国际粘接技术研讨会论文集[C].北京:北京粘接学会,2010.
Zhao Bo,Lv Zhenhua,Lv Yining.The analytical solution of stress analysis of single lap joint[A].2010 Beijing International Bonding Technology Symposium[C].Beijing:Beijing Adhesion Society,2010.
[12]Naghdali C.Characterization of fracture in adhesively bonded double-lap joints[J].International Journal of Adhesion and Adhesives,2009,29(8):761-773.
[13]Campilho R,Banea M,Pinto A,et al.Strength prediction of single-and double-lap joints by standard and extended finite element modelling[J].International Journal of Adhesion and Adhesives,2011,31(5):363-372.
[14]Kong Fanrong,Min You,Zheng Xiaoling,et al.Three-dimensional stress analysis of adhesive-bonded joints under cleavage loading[J].International Journal of Adhesion and Adhesives,2007,27(4):298-305.
[15]Harald O,McGeorge D.Predicting failure of bonded patches using a fracture mechanics approach[J].International Journal of Adhesion and Adhesives,2012,37:102-111.
[16]郭霞,关志东,刘遂,等.搭接长度对复合材料单搭接胶接接头的影响[J].科技导报,2013,31(7):37-41.
Guo Xia,Guan Zhidong,Liu Sui,et al.Effect of lap length on the adhesive-bonded single-lap composite joints[J].Science & Technology Review,2013,31(7):37-41.
[17]Blackketter D,Walrath D,Hansen A.Modeling damage in a plain weave fabric-reinforced composite material[J].Journal of Composites Technology & Research,1993,15(2):136-142.
[18]Simulia D C S.ABAQUS 6.11 analysis user's manual[EB/OL].http://www.tuchemnitz.de/projekt/abq_hilfe/docs/v6.11/books/usb/default.htm,2011.
[19]刘伟先,周光明,王新峰.基于渐进损伤模型的复合材料斜接接头的拉伸强度[J].材料科学与工程学报,2012,30(5):666-671.
Liu Weixian,Zhou Guangming,Wang Xinfeng.Parametric study on the tensile strength of the composites scarf joint using progressive damage model[J].Journal of Materials Science & Engineering,2012,30(5):666-671.

Memo

Memo:
-
Last Update: 2014-08-31