[1]贺晓军,王泽山.钝感火药和混合装药定容燃烧性能的评定方法[J].南京理工大学学报(自然科学版),1996,(05):13-16.
 HeXiaojun WangZeshan.Evaluating Methods of Combustion Performance at Constant Volume of Deterred Propellant and Mixed Charge[J].Journal of Nanjing University of Science and Technology,1996,(05):13-16.
点击复制

钝感火药和混合装药定容燃烧性能的评定方法()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
1996年05期
页码:
13-16
栏目:
出版日期:
1996-10-30

文章信息/Info

Title:
Evaluating Methods of Combustion Performance at Constant Volume of Deterred Propellant and Mixed Charge
作者:
贺晓军王泽山
南京理工大学化工学院, 南京210094
Author(s):
HeXiaojun WangZeshan
School of Chemical Engineering,NUST,Nanjing 210094
关键词:
推进剂 燃烧性能 密闭爆发器
Keywords:
propellant s combustion performance closed bomb v essels
分类号:
TQ562.21
摘要:
密闭爆发器试验是目前评定火药定容燃烧性能最主要的方法。通过密闭爆发器装置直接测量的p—t曲线经数学处理得到的各种参数关系,其基本条件是均质火药和平行层燃烧规律。但对混合装药或表面经钝感处理的火药,这种传统的处理方法有一定的局限性。该文分析了产生这种局限性的原因,提出了适用于钝感火药和混合装药的定容燃烧性能评定方法,并对各类评定方法的适用性做了讨论
Abstract:
Propellant’s combustion perfo rmance at constant v olume accessed by closed bomb test is the mo st universal method of today. T he relat ionships between parameters received from mathemat ically tr eated p —t curve measured direct ly f rom closed bomb dev ice are based on homo geneous propellant and parallel combustion law . But for mix ed char ge and deterred propellant , this t radit ional method has some limitat io ns. In this paper, the reason causing the limitat ions is analysed and evaluating methods f it for deterred propellant and mixed charge’s combust ion performance at constant volume are adv anced. Applicat ion of all ev aluat ing methods is discussed.

参考文献/References:

1 罗运军. 低温感包覆火药装药技术的理论与实验研究. [ 博士学位论文] . 南京: 南京理工大学, 1994
2 华东工程学院. 内弹道实验原理. 北京: 国防工业出版社, 1984. 6

相似文献/References:

[1]张家仙,郑 亚,鞠玉涛.膏体推进剂在热管道内流动的建模与仿真[J].南京理工大学学报(自然科学版),2009,(03):312.
 ZHANG Jia-xian,ZHENG Ya,JU Yu-tao.Modeling and Simulation of Pasty Propellant Flow in Hot Pipe[J].Journal of Nanjing University of Science and Technology,2009,(05):312.
[2]李笑江,李凤生,安芳延.粒铸工艺对无烟EMCDB推进剂压强指数的改进[J].南京理工大学学报(自然科学版),2002,(02):201.
 LiXiaojiang LiFengsheng AnFangyan.Improvement of Pressure Exponent of Smokeless EMCDB Propellant by Granule-casting Process[J].Journal of Nanjing University of Science and Technology,2002,(05):201.
[3]何沛仁,吴琼雷,张友良.发射药柔性制造技术仿真演示系统的研究[J].南京理工大学学报(自然科学版),1997,(05):19.
 HePeiren WuQionglei ZhangYouliang.A Study of Simulation System in Propellant Flexible Manufacturing Technology[J].Journal of Nanjing University of Science and Technology,1997,(05):19.
[4]黄洪勇,王泽山.低温感包覆药已燃质量分数的一种计算方法[J].南京理工大学学报(自然科学版),1997,(05):31.
 HuangHongyong WangZeshan.A Method of Calculating Percentage of Burned Mass of Low Temperature Sensitivity Coated propellant[J].Journal of Nanjing University of Science and Technology,1997,(05):31.
[5]杨栋,赵宝昌,宋洪昌,等.硝胺(RDX,HMX)发射药燃烧性能的模拟[J].南京理工大学学报(自然科学版),1997,(05):35.
 YangDong ZhaoBaochang SongHongchang HeXiuying.Modeling for Nitramine (RDX,HMX) Propellant Burning Characteristics[J].Journal of Nanjing University of Science and Technology,1997,(05):35.
[6]陆欣,刘东尧,周彦煌.火药填充床中温度场的测定与数值计算[J].南京理工大学学报(自然科学版),1996,(03):201.
 Lu Xin,Liu Dongyao,Zhou Yanhuang.Measurement and Numerical Calculation of Temperature Field in Propellant Packed Bed[J].Journal of Nanjing University of Science and Technology,1996,(05):201.
[7]武海顺,王泽山.包覆药中增塑剂的迁移及其分布[J].南京理工大学学报(自然科学版),1994,(04):42.
 Wu Haishun.The Migration and Distribution of Plasticizer in Covering Propellant。[J].Journal of Nanjing University of Science and Technology,1994,(05):42.
[8]王泽山.论现代发射装药技术的研究方向[J].南京理工大学学报(自然科学版),1994,(04):93.
 Wang Zeshan.On Modern Research Trend of Propellant Charge Tech- niques.[J].Journal of Nanjing University of Science and Technology,1994,(05):93.
[9]庄国镇,鲍廷钰,邱文坚.多元判别分析在库存发射药质量监测中的应用[J].南京理工大学学报(自然科学版),1993,(03):11.
[10]李锋,张振铎,余永刚.点火方式对不同初始温度的装药燃烧性能的影响[J].南京理工大学学报(自然科学版),1993,(03):16.

备注/Memo

备注/Memo:
国防科技预研行业基金
贺晓军 女 26 岁 博士生
更新日期/Last Update: 2013-04-11