[1]王良模,曾小平,于鹏晓.汽车液压制动系统设计与分析软件的开发[J].南京理工大学学报(自然科学版),2001,(03):247-251.
 WangLiangmo ZengXiaoping YuPengxiao.The Development of the Software of Designing and Analyzing Vehicle Brake System[J].Journal of Nanjing University of Science and Technology,2001,(03):247-251.
点击复制

汽车液压制动系统设计与分析软件的开发()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2001年03期
页码:
247-251
栏目:
出版日期:
2001-06-30

文章信息/Info

Title:
The Development of the Software of Designing and Analyzing Vehicle Brake System
作者:
王良模曾小平于鹏晓
南京理工大学机械学院, 南京210094
Author(s):
WangLiangmo ZengXiaoping YuPengxiao
School of Mechanics,NUST,Nanjing 210094
关键词:
汽车 制动系统 软件
Keywords:
vehicle brake system sof tw are
分类号:
U463.521
摘要:
按并行工程观点 ,以经典的制动理论等国内外专著为理论依据 ,以VB 6 .0为程序语言 ,开发设计了汽车液压制动系统设计与分析软件。利用该软件对制动系统进行设计计算及分析 ,可以在改善设计人员的工作状况、减少设计时间并提高工作结果的直观性的同时 ,得到与专家相同水平的设计。
Abstract:
According to the view of the collateral project , systemat ically researching the theories of the vehicle brake system, using the lang uage Visual Basic as the procedure language, a sof tw are of designing and analyzing vehicle brake system has been developed, based on the classical art icles of both foreign and domest ic. In designing and analyzing vehicle brake system, the result can reach the expert design level w ith well working status, less designing t ime and improved visualizat ion.

参考文献/References:

1 吉林工业大学汽车教研室. 汽车设计. 北京: 机械工业出版社, 1981
2 王良模. 轻型汽车液压制动系统的理论与实验研究: [ 博士学位论文] . 南京: 南京理工大学,2000
3 郭孔辉. 用于汽车制动、驱动与转向运动模拟的轮胎力学统一模型. 汽车技术, 1992( 1) : 11~18

相似文献/References:

[1]林棻,赵又群.汽车侧偏角估计方法比较[J].南京理工大学学报(自然科学版),2009,(01):122.
 LIN Fen,ZHAO You-qun.Comparison of Methods for Estimating Vehicle Side Slip Angle[J].Journal of Nanjing University of Science and Technology,2009,(03):122.
[2]王良模,彭育辉①,曾小平.浮钳盘式制动器的有限元分析[J].南京理工大学学报(自然科学版),2003,(06):756.
 Wang Liangmo Peng Yuhui Zeng Xiaoping.Finite Element Analysis on Key Parts of Float Disk Brake[J].Journal of Nanjing University of Science and Technology,2003,(03):756.
[3]丁玉庆.汽车振动系统的简化及数学模型的建立[J].南京理工大学学报(自然科学版),2001,(04):391.
 DingYuqing.On Setting up Simplified and Mathematical Model of Truck Vibration System[J].Journal of Nanjing University of Science and Technology,2001,(03):391.
[4]王良模,孙刚,于鹏晓,等.鼓式制动器效能因数的计算研究[J].南京理工大学学报(自然科学版),1999,(03):32.
 WangLiangmo SunGang YuPengxiao LuQiang PengYuhui.A Study on the Calculation of Drum Brakes Efficiency Factor[J].Journal of Nanjing University of Science and Technology,1999,(03):32.
[5]张河,翟性泉,李豪杰.汽车安全气囊磁电式传感器的设计与研究[J].南京理工大学学报(自然科学版),1999,(04):324.
 ZhangHe ZhaiXingquan LiHaojie.Design and Research of Magnetic electric Sensor for Safety Airbag of Automobile[J].Journal of Nanjing University of Science and Technology,1999,(03):324.
[6]刘振吉,邓德贵,朱晓,等.判定汽车失效分布的统一线性检验法[J].南京理工大学学报(自然科学版),1999,(05):438.
 LiuZhenji DengDegui ZhuXiao MaYumin.The Consolidated Linearity Testing Method to Determine Automobile Failure Distributions[J].Journal of Nanjing University of Science and Technology,1999,(03):438.
[7]王良模,王和福,陈锦荣,等.IVECO 汽车驱动桥试验台的研制[J].南京理工大学学报(自然科学版),1997,(02):97.
 Wang Liangmo Wang Hefu Chen Jinrong Lin Zhilian Cao Yuhua.The Developmet of the IVECO Automobile Driving Shaft’s Test[J].Journal of Nanjing University of Science and Technology,1997,(03):97.
[8]杨江子,商庆清,潘江静.汽车效果图的一种简捷画法[J].南京理工大学学报(自然科学版),1996,(04):57.
 YangJiangzi ShangQingqing PanJiangjing.A Simple Pictorial Drawing of A Car[J].Journal of Nanjing University of Science and Technology,1996,(03):57.
[9]马玉民,蔡经涵.汽车产品可靠性评估方法[J].南京理工大学学报(自然科学版),1994,(05):71.
 Ma Yumin.The Evaluation Method for Reliability of Automobile Products.[J].Journal of Nanjing University of Science and Technology,1994,(03):71.
[10]刘荣先,吴华杰,秦永法,等.基于FEM的汽车加速踏板臂断口槽优化设计[J].南京理工大学学报(自然科学版),2013,37(06):946.
 Liu Rongxian,Wu Huajie,Qin Yongfa,et al.Optimization design of fracture groove for automobile accelerator pedal arm based on FEM[J].Journal of Nanjing University of Science and Technology,2013,37(03):946.

备注/Memo

备注/Memo:
王良模 男 38 岁 博士 副教
更新日期/Last Update: 2013-03-25