[1]何大平,廖振强,王涛.喷管驱动的转管武器系统参量优化设计[J].南京理工大学学报(自然科学版),2004,(05):477-480.
 HE Da-ping,LIAO Zhen-qiang,WANG Tao.Optimization of Gatling Weapon System Driven by Jet[J].Journal of Nanjing University of Science and Technology,2004,(05):477-480.
点击复制

喷管驱动的转管武器系统参量优化设计()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2004年05期
页码:
477-480
栏目:
出版日期:
2004-10-30

文章信息/Info

Title:
Optimization of Gatling Weapon System Driven by Jet
作者:
何大平廖振强王涛
南京理工大学机械工程学院, 江苏南京210094
Author(s):
HE Da-pingLIAO Zhen-qiangWANG Tao
School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
转管武器 优化设计 动态仿
Keywords:
Gat ling w eapon optimizat ion dynamic simulat io
分类号:
TJ26;TJ202
摘要:
利用约束条件下l维极值复型调优法 ,考虑与喷管驱动的转管武器系统动力学有关的 14个系统参量和 4个动力学特性的约束参量 ,从保证转管武器射击稳定性及后坐缓冲特性等要求出发 ,对该武器系统进行优化设计 ,并建立了该武器系统的优化模型。该优化设计模型为转管武器的改进设计提供了一种分析方法
Abstract:
This paper uses l dimensions ex tremum compound optimizat ion under restrict ion condit ions. 14 system parameters related to Gat ling w eapon system driven by Laval jet , and 4 re st riction parameters about Gat ling w eapon system dynamic characteristics were considered in the opt imizat ion. The Gat ling w eapon system w as opt imized and an opt imization model for the system was established. The opt imizat ion focuses on the shoot ing stability of the ewapon system and the system recoil cushion feature. The opt imization model provides an analyt ical method for the improvement of Gat ling w eapon.

参考文献/References:

[ 1] 何志强, 黄守仁, 李载弘. 航空自动武器设计手册[M] . 北京: 国防工业出版社, 1990.
[ 2] 何大平, 廖振强, 王涛. 转管机枪喷管气流反推驱动技术研究. 弹道学报, 2004, 16( 1) : 6~ 10.
[ 3] 鲍廷钰, 邱文坚. 内弹道学[ M] . 北京: 北京理工大学出版社, 1995.
[ 4] 徐士良. Fortran 常用算法程序集[M] . 北京: 清华大学出版社, 1995.

相似文献/References:

[1]史金光,王中原,孙洪辉,等.制导炮弹滑翔弹道优化设计方法研究[J].南京理工大学学报(自然科学版),2011,(05):610.
 SHI Jin-guang,WANG Zhong-yuan,SUN Hong-hui,et al.Optimization Design Method for Glide Trajectory of Guided Projectiles[J].Journal of Nanjing University of Science and Technology,2011,(05):610.
[2]赵瑞学,钱林方,陈龙淼,等.某旋转药室火炮卡弹机构弹簧优化设计[J].南京理工大学学报(自然科学版),2010,(06):775.
 ZHAO Rui-xue,QIAN Lin-fang,CHEN Long-miao,et al.Optimization Design for Cartridge Retaining Mechanism Springs of Gun with Rotating Chamber[J].Journal of Nanjing University of Science and Technology,2010,(05):775.
[3]史金光,王中原,常思江,等.鸭式制导炮弹气动外形优化设计方法研究[J].南京理工大学学报(自然科学版),2009,(05):555.
 SHI Jin-guang,WANG Zhong-yuan,CHANG Si-jiang,et al.Aerodynamic Shape Optimum Design Method for Guided Projectiles Equipped with Canards[J].Journal of Nanjing University of Science and Technology,2009,(05):555.
[4]邹明松,侯保林.两种大吨位磁流变阻尼器的功耗比较与参数优化[J].南京理工大学学报(自然科学版),2008,(06):719.
 ZOU Ming-song,HOU Bao-lin.Power Consumption Comparison and Parameter Optimization of Two Large Tonnage MR Dampers[J].Journal of Nanjing University of Science and Technology,2008,(05):719.
[5]王昊,鲁勇,方大纲,等.用馈电校正优化设计双馈点圆极化微带天线[J].南京理工大学学报(自然科学版),2007,(01):114.
 WANG Hao,LU Yong,FANG Da-gang.Optimization Design of Dual-feed Circular Polarization Patch Antenna Based on Feeding Correction[J].Journal of Nanjing University of Science and Technology,2007,(05):114.
[6]张广玉,赖一楠,杨乐民,等.五自由度对接缓冲试验台三维转动实现的研究[J].南京理工大学学报(自然科学版),2004,(05):494.
 ZHANG Guang-yu,LAI Yi-nan,YANG Le-min,et al.Method to Realize Three-dimensional Rotatation for Five-DOF Docking Buffer Table[J].Journal of Nanjing University of Science and Technology,2004,(05):494.
[7]钟晓芳,韩之俊.利用主成分分析对多质量特性的优化设计[J].南京理工大学学报(自然科学版),2003,(03):301.
 ZhongXiaofang Han.Multi-response Optimization Design Using Principal Component Analysis[J].Journal of Nanjing University of Science and Technology,2003,(05):301.
[8]廖振强,王涛,何大平,等.抛放弹弹射机构优化设计[J].南京理工大学学报(自然科学版),2003,(05):573.
 Liao Zhenqiang Wang Tao He Daping Wang Hui.Optimization of Blank Cartridge Ejection Device[J].Journal of Nanjing University of Science and Technology,2003,(05):573.
[9]徐明友,丁松滨,徐直军.外弹道优化设计的随机模型[J].南京理工大学学报(自然科学版),1997,(05):23.
 XuMingyou DingSongbin XuZhijun.Random Model for Optimum Design of Exterior Ballistics[J].Journal of Nanjing University of Science and Technology,1997,(05):23.
[10]宋梅利,范元勋,祖莉,等.基于ADAMS的六连杆冲压机构的仿真优化设计[J].南京理工大学学报(自然科学版),2006,(03):285.
 SONG Mei-li,FAN Yuan-xun,ZU Li.Imitation and Optimization Design of six-bar Linkage Punch Mechanism Based on ADAMS[J].Journal of Nanjing University of Science and Technology,2006,(05):285.

备注/Memo

备注/Memo:
作者简介: 何大平( 1963- ) , 男, 重庆人, 博士生, 主要研究方向: 自动武器设计及动力学分析, E-mail: HDPFYR 001@ 163. com。
更新日期/Last Update: 2013-03-11