[1]朱龙英,朱如鹏,刘正埙.基于公理化设计理论的并行设计决策研究[J].南京理工大学学报(自然科学版),2004,(06):617-621.
 ZHU Long-ying,ZHU Ru-peng,LIU Zheng-xun.Decision-making System of Concurrent Design Based on Axiomatic Design[J].Journal of Nanjing University of Science and Technology,2004,(06):617-621.
点击复制

基于公理化设计理论的并行设计决策研究()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2004年06期
页码:
617-621
栏目:
出版日期:
2004-12-30

文章信息/Info

Title:
Decision-making System of Concurrent Design Based on Axiomatic Design
作者:
朱龙英朱如鹏刘正埙
南京航空航天大学机电工程学院, 江苏南京
Author(s):
ZHU Long-yingZHU Ru-peng LIU Zheng-xun
College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China
关键词:
公理化设计 并行设计 决策 评价指
Keywords:
axiomatic design concurrent design decision-making evaluat ion ind
分类号:
TP311.52
摘要:
针对并行设计决策系统的特点 ,建立了基于公理化设计理论的并行设计决策系统模型。以面向制造的设计为例 ,通过决策目标分解 ,将一个复杂的耦合系统转变成非耦合的模块组合结构 ,建立了可制造性评价指标体系 ,讨论了决策系统的设计过程 ,为计算机辅助决策过程奠定了基础。
Abstract:
Directed against the characteristic of decision-making system of concurrent design, a module of decision-making system of concurrent design based on axiomatic design was established. As an example with design for manufacturing, a complicated coupled design was changed into uncoupled design of assembled module by zigzagging decomposition of decision-making goal. The index system for manufacturability evaluation was obtained and the design process of decision-making system was discussed. It lays the foundation for the computer aided decision-making process.

参考文献/References:

[ 1] Suh N P. The principle of design[M] . New York: Oxford University Press, 1990.
[ 2] Lindholm D, Tate D, Harutunian V. Consequences of design decisions in axiomatic design[ J] . Journal of Integrated Design and Process Science, 1999, 3( 4) : 1~ 12.
[ 3] Harutunian V, NordlundM, Tate D, et al. Decision making and software tools for product development based on axiomatic design theory[ J] . CIRP Annals, 1996, 45( 1) : 25~ 31.
[ 4] Danesh M R, Jin Y. An aggregated value model for collaborative engineering decisions[ A] . Design Engineering Technical Conferences and Computers and Information in Engineering Conference Baltimore[ C] . Maryland: Proceedings of DET and CIE, 2000. 10~ 13.
[ 5] 孟明辰, 韩向利. 并行设计[M] . 北京: 机械工业出版社, 1999. 12.
[ 6] 吴玉光, 高曙明. 基于特征的产品可制造性评价方法综述[ J] . 中国机械工程, 2001, 7: 756~ 759.
[ 7] 李海刚, 高国安. 一种基于知识的并行设计综合决策方法[ J] . 计算机集成制造系统, 2000, 2: 11~ 14.
[ 8] Cappetti N. Axiomatic evaluation of a support plate fuzzy design for electrical accumulator in a motor vehicle[ A] . XII ADM International Conference[ C] . Rimini Italy: Proceedings of the Xll ADM, 2001. 1~ 8.

相似文献/References:

[1]李峰,徐诚,赵彦峻,等.面向并行工程的轻武器协同设计研究[J].南京理工大学学报(自然科学版),2007,(02):214.
 LI Feng,XU Cheng,ZHAO Yan-jun,et al.Collaborative Design of Small Arms for Concurrent Engineering[J].Journal of Nanjing University of Science and Technology,2007,(06):214.
[2]赵勇,徐诚,杨明忠.并行设计的模糊决策及其决策系统[J].南京理工大学学报(自然科学版),1998,(03):5.
 Zhao Yong Xu Cheng Yang Mingzhong.Fuzzy Decision of Concurrent Design and Its Decision System[J].Journal of Nanjing University of Science and Technology,1998,(06):5.

备注/Memo

备注/Memo:
基金项目: 江苏省高校自然科学计划项目( 03KJD460243)
作者简介: 朱龙英( 1962- ) , 女, 江苏大丰人, 盐城工学院机械工程学院副教授, 博士生, 主要研究方向: 现代设计理论与方法, E-mail: longyingzhu@ sohu. com。
更新日期/Last Update: 2013-03-11