[1]申 越,等.灰色系统理论在火炮内弹道性能变化量中的应用[J].南京理工大学学报(自然科学版),2005,(05):29-31.
 SHEN Yue~.Application of Grey-system Theory in Interior Ballistics Performance’s Variety of Gun[J].Journal of Nanjing University of Science and Technology,2005,(05):29-31.
点击复制

灰色系统理论在火炮内弹道性能变化量中的应用
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2005年05期
页码:
29-31
栏目:
出版日期:
2005-10-30

文章信息/Info

Title:
Application of Grey-system Theory in Interior Ballistics Performance’s Variety of Gun
作者:
申 越1 2 季新源1 袁亚雄1
11 南京理工大学动力工程学院, 江苏南京, 210094; 21 中国兵器科学研究院, 北京, 100089
Author(s):
SHEN Yue~
1,2),JI Xin-yuan~1,YUAN Ya-xiong~1
关键词:
火炮 内弹道 内膛磨损 灰色系统
Keywords:
guns internal ballistics barre-l wear grey system
分类号:
TJ301;
摘要:
为了研究火炮内膛质量状况与内弹道性能改变量之间的不确定相关性,提出采用灰色系统理论进行分析的方法,并建立了GM(1,N)计算模型,通过利用该模型对某大口径加农炮进行计算,结果表明:弹丸膛口速度计算值与实测值的相对差小于0.3%,膛压的相对差小于2%。
Abstract:
In order to investigate the uncertain relationship between the quality of internal barrel and the interior ballistics performance of a gun, the grey-system theory is used. Corresponding GM( 1, N ) numeration model is put forward. One large caliber cannon is analyzed by the model. The results show that the relative difference of numerat ion data and testing data of the projectile muzzle velocity is less than 0. 3 % , and that of the maximum pressure in chamber is less than 2 % .

参考文献/References:

[ 1] Arisawa H, Kimura J. Applicability of the hydrogen gas erosion theory to conventional gun propellants[ A] . 19th International Symposium on Ballistics [ C] . Interlaken, Switzerland: International Ballistics Society, 2001: 7- 11.
[ 2] 田桂军. 内膛烧蚀磨损及其对内弹道性能影响的研究 [ D] . 南京: 南京理工大学动力工程学院, 2003. 30- 43.
[ 3] 王学萌. 灰色系统分析及实用计算程序[M] . 武汉: 华中科技大学出版社, 2001.
[ 4] 邓聚龙. 灰预测与灰决策[M] . 武汉: 华中科技大学出版社, 2002.

相似文献/References:

[1]王珊珊,王浩,阮文俊,等.单兵火箭平衡发射系统内弹道数值模拟[J].南京理工大学学报(自然科学版),2011,(03):343.
 WANG Shan-shan,WANG Hao,RUAN Wen-jun,et al.Numerical Simulation on Interior Ballistic of Individual Rocket Balance Launching System[J].Journal of Nanjing University of Science and Technology,2011,(05):343.
[2]刘志涛,徐滨,南风强,等.低温感包覆火药燃烧过程破孔规律研究[J].南京理工大学学报(自然科学版),2011,(05):709.
 LIU Zhi-tao,XU Bin,NAN Feng-qiang,et al.Coating Perforation Laws in Combustion Process of Low Temperature Sensitivity Coated Propellant[J].Journal of Nanjing University of Science and Technology,2011,(05):709.
[3]郁伟,朱斌,张小兵,等.耦合内弹道过程的膛口流场数值模拟与分析[J].南京理工大学学报(自然科学版),2009,(03):335.
 YU Wei,ZHU Bin,ZHANG Xiao-bing.Numerical Simulation and Analysis of Muzzle Flow Field Coupling with Interior Ballistic Process[J].Journal of Nanjing University of Science and Technology,2009,(05):335.
[4]彭志国,周彦煌,齐丽婷,等.火炮内膛涂油弹炮接触熔化热流体模型与分析[J].南京理工大学学报(自然科学版),2008,(01):13.
 PENG Zhi-guo,ZHOU Yan-huang,QI Li-ting.Model and Analysis of Melt-lubrication Between Band and Tube with Oil on Gun Internal Surface[J].Journal of Nanjing University of Science and Technology,2008,(05):13.
[5]陈龙淼,钱林方.复合材料身管膛内气流与固壁传热分析[J].南京理工大学学报(自然科学版),2008,(03):327.
 CHEN Long-miao,QIAN Lin-fang.Heat Transfer Between Gas and Inner Surface of Composite Material Barrels[J].Journal of Nanjing University of Science and Technology,2008,(05):327.
[6]陈杨,廖振强,王涛,等.自动武器喷管气流反推减后坐技术[J].南京理工大学学报(自然科学版),2008,(06):676.
 CHEN Yang,LIAO Zhen-qiang,WANG Tao,et al.Technology of Reducing Recoil Force by Reverse Jet Gas for Autoweapons[J].Journal of Nanjing University of Science and Technology,2008,(05):676.
[7]陆欣,张浩,周彦煌,等.埋头弹内弹道过程数值分析[J].南京理工大学学报(自然科学版),2008,(06):690.
 LU Xin,ZHANG Hao,ZHOU Yan-huang,et al.Numerical Analysis on Interior Ballistics of Cased Telescoped Ammunition[J].Journal of Nanjing University of Science and Technology,2008,(05):690.
[8]陈龙淼,钱林方.基于热效应的复合材料身管强度分析[J].南京理工大学学报(自然科学版),2008,(06):710.
 CHEN Long-miao,QIAN Lin-fang.Strength of Composite Materials Barrels Based on Thermal Effect[J].Journal of Nanjing University of Science and Technology,2008,(05):710.
[9]张 帆,廖振强,王 涛,等.膨胀波枪炮发射原理数值建模与分析[J].南京理工大学学报(自然科学版),2007,(01):17.
 ZHANG Fan,LIAO Zhen-qiang,WANG Tao,et al.Numerical Modeling and Analysis on Rarefaction Wave Gun[J].Journal of Nanjing University of Science and Technology,2007,(05):17.
[10]王昌明*,陈,柳光辽,等.相关分析在水下枪械内弹道计算中的应用[J].南京理工大学学报(自然科学版),2005,(03):260.
 WANG Chang-ming,CHEN Jie,LIU Guang-Liao,et al.Application of Correlation Analysis Used in Interior Ballistics Calculation for Underwater Gun[J].Journal of Nanjing University of Science and Technology,2005,(05):260.
[11]季新源,袁亚雄,王敬,等.超高射频火炮内弹道优化设计[J].南京理工大学学报(自然科学版),2008,(02):185.
 JI Xin-yuan,YUAN Ya-xiong,WANG Jing,et al.Interior Ballistic Optimalized Design of Hyper Firing-rate Gun[J].Journal of Nanjing University of Science and Technology,2008,(05):185.
[12]张小兵,彭振伟,王力,等.串联双药室火炮经典内弹道模型及数值模拟[J].南京理工大学学报(自然科学版),1999,(02):9.
 Zhang Xiaobing Peng Zhenwei Wang Li Yuan Yaxiong.A Classical Model of Serial Double Chamber Gun and Its Numerical Simulation[J].Journal of Nanjing University of Science and Technology,1999,(05):9.
[13]孙全兆,杨国来,易群智,等.半密闭爆发器式火炮模拟后坐系统动力学研究[J].南京理工大学学报(自然科学版),2013,37(05):687.
 Sun Quanzhao,Yang Guolai,Yi Qunzhi,et al.Dynamics of gun simulated recoil system with semi-closed bomb[J].Journal of Nanjing University of Science and Technology,2013,37(05):687.

备注/Memo

备注/Memo:
作者简介: 申越( 1977- ) , 男, 山西长治人, 博士, 主要研究方向: 兵器发射理论与技术, 现代火控理论, E-mail: jacksy@ sina. com;
通讯作者: 袁亚雄( 1944- ) , 男, 教授, 博士生导师, 主要研究方向: 现代发射技术, 高温高压多相流体力学, E-mail: yuan _yx@ 263. net。
更新日期/Last Update: 2013-05-29