[1]彭志国,周彦煌,齐丽婷,等.火炮内膛涂油弹炮接触熔化热流体模型与分析[J].南京理工大学学报(自然科学版),2008,(01):13-17.
　PENG Zhi-guo,ZHOU Yan-huang,QI Li-ting.Model and Analysis of Melt-lubrication Between Band and Tube with Oil on Gun Internal Surface[J].Journal of Nanjing University of Science and Technology,2008,(01):13-17.
点击复制

火炮内膛涂油弹炮接触熔化热流体模型与分析
分享到：

《南京理工大学学报》（自然科学版）[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2008年01期
页码:
13-17
栏目:
出版日期:
2008-02-28

文章信息/Info

Title:
Model and Analysis of Melt-lubrication Between Band and Tube with Oil on Gun Internal Surface
作者:
彭志国;周彦煌;齐丽婷;
1. 南京理工大学动力工程学院, 江苏南京210094; 2. 南京汽车集团工程研究院, 江苏南京210028
Author(s):
PENG Zhi-guo1; ZHOU Yan-huang1; QI Li-ting1; 2
1.School of Power Engineering,NUST,Nanjing 210094,China;2.Nanjing Automotive Research Institute,Nanjing 210028,China
关键词:
火炮;  弹带;  熔化润滑
Keywords:
guns;  band;  melt lubrication
分类号:
TJ301
摘要:
该文就火炮内膛涂油条件下,弹丸在膛内高速运动中的弹炮接触熔化进行了分析,建立了涂油条件下的弹炮接触熔化热流体模型,进行了数值计算,计算了弹带熔化速度和厚度及其对弹丸摩擦系数的影响,结果与实验值吻合较好。计算结果表明:在弹丸滑动速度到达一定数值后,首发涂油时的摩擦系数与无油时一致。但在此之前,即弹丸运动初期的一段距离上,摩擦阻力大于后续各发,这是造成首发炮弹初速偏大,射程偏远的一个因素。该文所得结果可应用于内弹道计算,从而为认识弹丸在膛内强制滑动下的接触摩擦及其弹丸运动中的阻力机制,弄清炮膛涂油对弹丸初速的影响提供了理论依据。
Abstract:
This paper establishes a mathematical model of melt-lubrication between band and gun tube with oil on the bore interface.Through numerical calculation,the velocily and the thickness of band melt-liquid are given and the influences of friction coefficients are calculated.The calculation results approximately accord with experimental results.The results show that the friction coefficients of the first round projectile are the same as those of the latter rounds after a few distance,but the first one is larger than the latter one when the projectile starts moving.It is an important factor that makes first round velocity higher and range further.The model can be applied in interior ballistic calculation and helps to understand the friction and the grip resistance mechanism on coercive sliding.This paper provides theoretical references about how the oil influences projectile velocity.

参考文献/References:

[1] 温诗铸, 黄平. 摩擦学原理[M ]. 北京: 清华大学出 版社, 2002.
[2] M ontgom ery R S. Ev idence for the m e ltlubrica tion o f pro jectile bands [ R]. US Arm y Armam ent Resea rch and Deve lopm en t Center, ADA136184, 1983.
[3] 张喜发, 卢兴华. 火炮烧蚀内弹道学[M ]. 北京: 国 防工业出版社, 2001.
[4] Ko thm ann R E, Stefani F. A therm a l hydraulic m ode l o f m e ltlubr ica tion in ra ilgun arm atures [ J ]. IEEE T ransactions on m agne tics, 2001.
[5] 周彦煌, 王升晨. 实用两相流内弹道学[M ]. 北京: 兵器工业出版社, 1990.
[6] M errill R, Ste fan i F. A turbulent m e ltlub rica tion m ode l of surfacew ear in railgun arm atures [ J]. IEEE T ransactions on M agnetics, 2005, 41 ( 1 ): 414 - 419.
[7] 邢立华, 江旭初, 雷丙旺, 等. 浮动铰刀振动铰削小 口径火炮身管的研究[ J]. 兵工学报, 2007, 28( 6), 739- 742.
[8] 董浚修. 润滑原理及润滑油[M ]. 北京: 中国石化 出版社, 1998.

相似文献/References:

[1]季新源,袁亚雄,王敬,等.超高射频火炮内弹道优化设计[J].南京理工大学学报(自然科学版),2008,(02):185.
　JI Xin-yuan,YUAN Ya-xiong,WANG Jing,et al.Interior Ballistic Optimalized Design of Hyper Firing-rate Gun[J].Journal of Nanjing University of Science and Technology,2008,(01):185.
[2]陈龙淼,钱林方.基于热效应的复合材料身管强度分析[J].南京理工大学学报(自然科学版),2008,(06):710.
　CHEN Long-miao,QIAN Lin-fang.Strength of Composite Materials Barrels Based on Thermal Effect[J].Journal of Nanjing University of Science and Technology,2008,(01):710.
[3]谈乐斌,范红梅.火炮人机系统计算机仿真[J].南京理工大学学报(自然科学版),2005,(04):414.
　TAN Le-bin,FAN Hong-mei.Computer Simulation of Artillery Man-machine System[J].Journal of Nanjing University of Science and Technology,2005,(01):414.
[4]石明全,刘雷,陈运生.某火炮自动供弹机动力学分析[J].南京理工大学学报(自然科学版),2003,(03):252.
　ShiMingquan LiuLei ChenYunsheng.Dynamic Analysis of a Gun’s Automatic Ramming Organ[J].Journal of Nanjing University of Science and Technology,2003,(01):252.
[5]高树滋,何永,王显会.我国发展轻型车载炮系统的可行性分析[J].南京理工大学学报(自然科学版),2003,(05):536.
　GaoShuzi HeYong WangXianhui.The Feasibility Analysis on the Development of Lightweight Truck-mounted Howitzers in China[J].Journal of Nanjing University of Science and Technology,2003,(01):536.
[6]周彦煌,余永刚,刘殿金,等.野战环境下药温精确测量必要性研究[J].南京理工大学学报(自然科学版),2007,(05):554.
　ZHOU Yan-huang,YU Yong-gang,LIU Dian-jin,et al.Necessity of Precision Measuring of Charge Temperature in Field Environment[J].Journal of Nanjing University of Science and Technology,2007,(01):554.
[7]杨伯忠,陈运生,程贤进.火炮射击精度仿真研究[J].南京理工大学学报(自然科学版),2002,(02):127.
　YangBozhong ChengYunsheng ChengXianjin.Study on Simulation Method for Evaluating Firing Accuracy of Ground Gun[J].Journal of Nanjing University of Science and Technology,2002,(01):127.
[8]楚志远,杨国来,张莉芳,等.船载火炮发射时船体的有限元分析[J].南京理工大学学报(自然科学版),2000,(03):257.
　ChuZhiyuan YangGuolai ZhangLifang ChenYunsheng.A Finite Element Analysis of the Hull of an Oversea Trawlboat under Gun Shooting[J].Journal of Nanjing University of Science and Technology,2000,(01):257.
[9]王长武,陈强,杨国来,等.可视化在火炮发射动力学仿真中的应用研究[J].南京理工大学学报(自然科学版),2000,(04):307.
　WangChangwu ChenQiang YangGuolai ChenYunsheng.Visualization of Gun Launch Dynamics Simulation[J].Journal of Nanjing University of Science and Technology,2000,(01):307.
[10]郑建国.火炮后效期非定常理论计算公式[J].南京理工大学学报(自然科学版),2000,(05):410.
　ZhengJianguo.Unsteady Theoretical Formulas for the Gas Ejection Period from Guns[J].Journal of Nanjing University of Science and Technology,2000,(01):410.

备注/Memo

备注/Memo:
作者简介: 彭志国( 1978- ), 男, 博士生, 主要研究方向: 兵器发射理论与技术, Email: peng. zh iguo@ yahoo. com. cn; 通讯作者: 周彦煌( 1940- ) , 男, 研究员, 博士生导师, 主要研究方向: 现代兵器发射理论与技术, E ma i:l zhouyh@ m ai.l njust. edu. cn。
更新日期/Last Update: 2012-12-05