[1]梁睿君,等.薄壁零件铣削加工系统动态特性测试与分析[J].南京理工大学学报(自然科学版),2009,(06):717-722.
 LIANG Rui-jun,YE Wen-hua,HUANG Xiang.Test and Analysis for Dynamic Characteristics of Thin-walled Components Milling System[J].Journal of Nanjing University of Science and Technology,2009,(06):717-722.
点击复制

薄壁零件铣削加工系统动态特性测试与分析
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2009年06期
页码:
717-722
栏目:
出版日期:
2009-12-30

文章信息/Info

Title:
Test and Analysis for Dynamic Characteristics of Thin-walled Components Milling System
作者:
梁睿君 1 2 叶文华 1 2 黄 翔 1 2
南京航空航天大学1.江苏省精密与微细制造技术重点实验室; 2. 机电学院,江苏南京210016
Author(s):
LIANG Rui-jun12YE Wen-hua12HUANG Xiang12
1.Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology;2.College of Mechanicaland Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China
关键词:
薄壁 铣削 有限元法 模态分析 稳定性
Keywords:
thin-walled components milling finite element method modal analysis stability
分类号:
TG54
摘要:
为预测薄壁件的铣削加工稳定性,采用有限元模态分析方法和试验模态分析方法,分别分析刀具子系统和工件子系统的动态特性。根据薄壁零件的振型模态,划分表示工件在加工过程中动态特性变化的不同加工阶段、选取能够在刀具切削位置激起振动位移的高阶动态频响模型作为预测切削稳定性的有效振型。对于薄壁零件的铣削加工,建立由刀具子系统和工件子系统相互作用的、考虑加工阶段并取决于有效振型的加工系统结构传递函数。稳定性预测结果与试验结果基本相符,证明系统传递函数的测定精度较高。
Abstract:
To predict the stability of the thin-walled components milling,the dynamic characteristics of the spindle-tool set and the workpiece are analysed respectively by the finite element modal analysis method and the experimental modal analysis method.The flexible workpiece vibration modes are available for partitioning the distinct machining stages that denote the dynamic variation characteristics of the workpiece in the process and for selecting the high-order dynamic frequency modes that can produce the displacement at the tool-cutting position as the virtual vibration modes to predict the cutting stability.For the thin-walled components milling,a system structural transfer function is proposed,which consists of a sub-section that describes the interaction of the spindle-tool set model and the workpiece dynamics,considers the machining stages position,and depends on the virtual vibration modes.The stability prediction results are in good agreement of the experimental results.The high precision of the system transfer function is proved.

参考文献/References:

[ 1] ParisH, PeigneG, Mayer R. Surfaceshape predictionin highspeedmilling[ J]. International Journal ofMachine ToolsandManufacture, 2004, 44(15): 1567-1576.
[ 2] KerstingR, BiermannD. Simulation concept for pre-dicting workpiece vibrations in five-axismilling[ J]. Machining Science andTechnology, 2009, 13( 2): 196-209.
[ 3] HuangQiang, ZhangGenbao, ChenKun. Continuityand breakof chatter vibration status[ J]. Chinese Journal of MechanicalEngineering, 2008, 21(4): 92-96.
[ 4] GradiÍekJ, KalveramM, Insperger T. Onstabilitypre-dictionformilling[ J]. International JournalofMachine ToolsandManufacture, 2005, 45( 7/8): 769-781.
[ 5] Merdol SD, AltintasY. Multi frequency solution of chatter stability for low immersionmilling[ J]. Journal ofManufacturing Science andEngineering, 2004, 126 ( 8): 459-466.
[ 6] NovakovT, JacksonM J. Chatter inmicro andmacro drilling[ J]. International Journal ofNanomanufactur-ing, 2009, 3( 3): 212-239.
[ 7] Man‰n?I, GagnolV, BouzgarrouBC, et a.l Stability-basedspindle speedcontrol during flexible workpiece high-speedmilling[ J]. International Journal ofMa-chineTools andManufacture, 2008, 48( 2): 184 -194.
[ 8] BravoU, AltuzarraO, L?pezDe Lacalle LN, et a.l Stability limits ofmilling considering the flexibility of theworkpiece andthemachine[ J]. International Jour-nal of Machine Tools and Manufacture, 2005, 45 ( 15): 1669- 1680.
[ 9] AkazawaK, ShamotoE. Study on regenerative chatter vibration in ball end milling of flexible workpieces [A]. 2008 International Symposium onMicro-Nano-Mechatronics andHuman Science[ C]. Nagoya, Ja-pan: IEEEComputer Society, 2008. 1- 6.
[ 10] DaviesM A, Balachandran B. Impact dynamics in milling of thin-walled structures[ J]. Nonlinear Dy-namic, 2000, 22( 4): 375-392.
[ 11] SchmitzTL, DonaldsonR. Predictinghigh-speedmach-i ning dynamics by substructure analysis[ J]. CIRPAn-nals-Manufacturing Technology, 2000, 49( 1): 303 -308.
[ 12] Zaghbani I, SongmeneV. Estimationofmachine-tool dynamic parameters during machining operation throughoperational modal analysis[ J]. International Journal ofMachineTools andManufacture, 2009, 49 (12/13): 947-957.
[ 13] Kivanc EB, BudakE. Structural modeling of end mills for formerror andstability analysis[ J]. Interna-tional Journal of Machine Tools and Manufacture, 2004, 44( 11): 1151-1161.
[ 14] ZhouHouming, Wang Chengyong, Zhao Zhenyu. Dy-namic characteristics of conjunction of lengthened shrink-fit holder andcutting tool inhigh-speedmilling [ J]. Journal of Materials Processing Technology, 2008, 207(1/3): 154- 162.
[ 15] MeshrekiM, KÊvecses J, AttiaH, et a.l Dynamics modeling and analysis of thin-walled aerospace struc-tures for fixture design inmultiaxismilling[ J]. Jour-nal ofManufacturing Science andEngineering, 2008, 130( 3): 031011. 1-031011. 12.
[ 16] SimsND, Bayly PV, YoungKA. Piezoelec sensors andactuators formilling tool stability lobes[ J]. Jour-nal of Sound and Vibration, 2005, 281( 9): 734 -762.
[ 17] 吴琼, 张以都,张洪伟, 等. 航空薄壁件铣削加工动态特性与实验分析[ J]. 兵工学报, 2008, 29( 9): 1118- 1122.

备注/Memo

备注/Memo:
基金项目: 国家自然科学基金( 50875127)
作者简介: 梁睿君( 1974- ), 女,博士, 主要研究方向:机械系统及制造过程的动力学建模和监控, 数控机床误差补偿技术, E-mail: lruijun@nuaa. edu. cn。
更新日期/Last Update: 2012-11-19