[1]徐健,薄玉成.转管机枪后坐对机心组传动系统的影响[J].南京理工大学学报(自然科学版),2012,36(06):0.
　XU Jian,BO Yu cheng.Influence of Gatling Gun Recoil on Bolt Group Transmission System[J].Journal of Nanjing University of Science and Technology,2012,36(06):0.
点击复制

转管机枪后坐对机心组传动系统的影响
分享到：

《南京理工大学学报》（自然科学版）[ISSN:1005-9830/CN:32-1397/N]

卷:
36卷
期数:
2012年06期
页码:
0
栏目:
出版日期:
2012-12-31

文章信息/Info

Title:
Influence of Gatling Gun Recoil on Bolt Group Transmission System
作者:
徐健; 薄玉成
中北大学 机电工程学院,山西 太原 030051
Author(s):
XU Jian; BO Yucheng
Electromechanical Engineering College,North University of China,Taiyuan 030051,China
关键词:
转管机枪; 后坐; 机心组; 传动系统; 机匣凸轮曲线槽; 主滚轮
Keywords:
gatling guns; recoil; bolt groups; transmission systems; cam curve slots; main rollers
分类号:
TJ301;TJ391
摘要:
为提高转管机枪的性能,研究了其后坐运动对机心组传动系统的影响。对机匣凸轮曲线槽与机心组主滚轮的三种状态进行了分析,依据动量矩定理列写机心组主滚轮运动微分方程。提出了在考虑后坐运动的前提下,机心组主滚轮提前横越冲击和逆传动的观点,探讨了转管机枪编程方案。将不同的间隙大小与是否考虑后坐运动进行组合。仿真实例表明:在考虑后坐运动及机心组主滚轮与机匣凸轮曲线槽之间装配间隙的情况下,机心组主滚轮会在几个短促的区间内突然换向,使其与机匣凸轮曲线槽的接触力突然增大,表现出与传统凸轮机构的加减速过程完全不同的特性;机匣凸轮曲线槽的磨损是由传动时的驱动压力和后坐运动的机心组主滚轮经常性的急刹车与快速换向造成的。
Abstract:
To improve the performances of gatling guns,the influences of their recoil motions on bolt group transmission systems are researched.Three statuses of the receiver cam curve slot and the bolt group main roller are analysed,and the bolt group main roller’s motion differential equation is expressed according to the principle of momentum moment.The viewpoint of erossover shock and inverse transfer motion in advance is presented considering the precondition of the recoil motion.Gatling guns’s acceleration and deceleration process;the cam curve’s wear is produced by the driving pressure force of transmission and the frequent brake and rotary fast direction changing.

参考文献/References:

[1]张策.机械动力学[M].北京:高等教育出版社,2002:80-81,139-140.
[2]尤国钊.自动武器设计[M].北京:国防工业出版社,1992:224-225.
[3]徐健,薄玉成,常学芳.超高射速转管机枪凸轮曲线槽分析与改进[J].火炮发射与控制学报,2007,28(4):43-46. Xu Jian,Bo Yucheng,Chang Xuefang.Analysis and improvement for cam curve groove for superhigh fire rate gatling gun[J].Journal of Gun Launch and Control,2007,28(4):43-46.
[4]Camara,Amara,Han Xuli.Approximation of the curves by bspline[J].Mathematical Theory and Application,2002,22(3):40-43. 
[5]Yan H S,Tsei M C,Hsu M H.A variablespeed method for improving motion characteristics of camfollower system[J].ASME Journal of Mechanical Design,1996,116(118):6-8.
[6]廖振强,耿光有,卜雄洙,等.转管机枪连发射击两自由度数学模型[J].兵工学报,2000,21(8):62-65. Liao Zhenqiang,Geng Guangyou,Bu Xiongzhu,et al.A mathematical model of two independent variables for the repeated firing process of a gatling gun[J].Acta Armamentarii,2000,21(8):62-65.
[7]王惠源.含间隙转管武器动力学研究与实验分析[D].太原:中北大学机电工程学院,2005:80-120.
[8]徐健,薄玉成,李强,等.高速反圆柱凸轮机构滚轮动力学分析[J].火炮发射与控制学报,2008,29(3):60-63. Xu Jian,Bo Yucheng,Li Qiang,et al.Roller dynamics analysis for high speed inverse cylinder cam mechanism[J].Journal of Gun Launch and Control,2008,29(3):60-63.
[9]薄玉成,徐健,李强,等.高速反圆柱凸轮机构滚轮纯滚动动力学分析[J].火炮发射与控制学报,2008,29(4):97-99. Bo Yucheng,Xu Jian,Li Qiang,et al.Dynamics analysis on roller’s pure rolling of high speed inverse cylinder cam mechanism[J].Journal of Gun Launch and Control,2008,29(4):97-99.
[10]郝秀平,薄玉成,杨臻.某转管机枪缓冲器设计与仿真[J].华北工学院学报,2003,24(3):230-232. Hao Xiuping,Bo Yucheng,Yang Zhen.A design and imitation of the buffer used in rotating barrels machine gun[J].Journal of North China Institute of Technology,2003,24(3):230-232.
[11]戴成勋,朵英贤,靳天佑.自动武器设计新编[M].北京:国防工业出版社,1990:81-108.
[12]郑建荣.ADAMS虚拟样机技术入门与提高[M].北京:机械工业出版社,2004:49-51.

相似文献/References:

[1]李佳圣,廖振强,李洪强,等.三脚架支承转管机枪射击密集度仿真[J].南京理工大学学报(自然科学版),2013,37(02):209.
　Li Jiasheng,Liao Zhenqiang,Li Hongqiang,et al.Simulation of fire density of gatling gun shooting on light tripod[J].Journal of Nanjing University of Science and Technology,2013,37(06):209.

备注/Memo

备注/Memo:
收稿日期:2010-07-02修回日期:2011-09-10 基金项目:中北大学青年科学基金(201001005) 作者简介:徐健(1979-),男,博士,主要研究方向:高射速转管武器动力学,Email:zdp12_0@126.com;通讯作者:薄玉成(1941-),男,教授,博士生导师,主要研究方向:转管武器发射技术,Email:bycnuc@nuc.edu.cn。
更新日期/Last Update: 2012-12-29