[1]袁军堂,夏玲玲,汪振华,等.灌胶结合面对数控机床动态性能影响研究[J].南京理工大学学报(自然科学版),2012,36(06):0.
　YUAN Jun tang,XIA Ling ling,WANG Zhen hua,et al.Impact of Glued Joint on Dynamic Characteristics of CNC Machine Tool[J].Journal of Nanjing University of Science and Technology,2012,36(06):0.
点击复制

灌胶结合面对数控机床动态性能影响研究
分享到：

《南京理工大学学报》（自然科学版）[ISSN:1005-9830/CN:32-1397/N]

卷:
36卷
期数:
2012年06期
页码:
0
栏目:
出版日期:
2012-12-31

文章信息/Info

Title:
Impact of Glued Joint on Dynamic Characteristics of CNC Machine Tool
作者:
袁军堂; 夏玲玲; 汪振华; 王志勇
南京理工大学 机械工程学院,江苏 南京 210094
Author(s):
YUAN Juntang; XIA Lingling; WANG Zhenhua; WANG Zhiyong
School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
灌胶结合面; 数控机床; 神经网络; 有限元模型; 灌胶厚度
Keywords:
glued joint; computer numerical control machine tools; neural network; finite element model; glued thickness
分类号:
TG502.14
摘要:
为了定量研究灌胶结合面对数控机床整机动态特性的影响,该文根据试验测得的小面积灌胶结合面特性参数,建立预测灌胶结合面参数的神经网络模型。建立弹簧单元,将结合面参数应用在整机有限元模型中,分析整机动态性能。结果表明:灌胶情况下的整机动态性能比无介质情况下提高约20%。以机床动柔度为评价目标,研究了灌胶厚度对整机动态性能的影响,得出灌胶的最优厚度区间是1.5~2 mm。
Abstract:
In order to research the effects of glued joint on the dynamic characteristics of computer numerical control(CNC)machine tools quantitatively,a neural network model for the forecasting parameters of glued joint is established based on the tested characteristic parameters of small area glued joint.The joint’s characteristics are applied to a finite element model with spring element,and the holistic dynamic characteristics are analyzed.The results show that the holistic dynamic characteristics of the CNC machine tools using gluing technique are about 20% higher than those without medium.Taking the dynamic flexibility of CNC machining tool as the target score,the effects of glued thickness on the holistic dynamic characteristics are analyzed,and the best gluing thickness is between 1.5 mm to 2 mm.

参考文献/References:

[1]杜碧华.数控机床安装的灌胶工艺新技术[J].成都纺织高等专科学校学报,2005,22(2):4-5. Du Bihua.Mechanical construction and new installation technology of numericallycontrolled machine tool[J].Journal of Chengdu Textile College,2005,22(2):4-5.
[2]孔伟,沐金锁.灌胶技术在机床装配上的应用[J].制造技术与机床,2009(9):79-80. Kong Wei,Mu Jinsuo.Application of new technology plastic irrigation on machine assembly[J].Manufacturing Technology & Machine Tool,2009(9):79-80.
[3]刘文化.机床部件结合面灌胶技术[J].机械工人(冷加工),2004(2):46-47. Liu Wenhua.Technology plastic irrigation of machine tool[J].Machinist Metal Cutting,2004(2):46-47.
[4]张威.数控机床结合面参数实验识别及其主结构动态优化[D].北京:北京工业大学机械工程与应用电子技术学院,2006.
[5]王志勇,胡小秋,郭丹峰.机床灌胶结合面特性参数试验及预测[J].制造技术与机床,2011(12):145-148. Wang Zhiyong,Hu Xiaoqiu,Guo Danfeng.Experiment and forecast on characteristic parameters of machine tool’s glued joint[J].Manufacturing Technology & Machine Tool,2011(12):145-148.
[6]黄瑶,孙宪萍,王雷刚.基于BP神经网络的挤压模具磨损预测[J].塑性工程学报,2006,13(4):64-66. Huang Yao,Sun Xianping,Wang Leigang.Wear prediction of extrusion die based on BP neutral networks[J].Journal of Plasticity Engineering,2006,13(4):64-66. 
[7]Yoshimura M,Hamada T,Yura K,et al.Design optimization of machinetool structures with respect to dynamic characteristics[A].American Society of Mechanical Engineers[C].Washington,USA:The Design Automation Committee,1982:82-95.
[8]杨橚,唐恒龄,廖伯瑜.机床动力学[M].北京:机械工业出版社,1983.

备注/Memo

备注/Memo:
收稿日期:2011-06-21修回日期:2012-10-27 基金项目:国家科技重大专项(2009ZX04014-036;2010ZX04014-051) 作者简介:袁军堂(1962-),男,教授,博士生导师,主要研究方向:先进制造工艺与装备,Email:mc106@njust.edu.cn。
更新日期/Last Update: 2012-12-29