[1]王小绪,何 勇.爆炸焊接参数对钛钢复合板界面波的影响[J].南京理工大学学报(自然科学版),2013,37(02):215.
 Wang Xiaoxu,He Yong.Influence of parameters of explosive welding on interfacial waves of Ti/steel composite plate[J].Journal of Nanjing University of Science and Technology,2013,37(02):215.
点击复制

爆炸焊接参数对钛钢复合板界面波的影响
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
37卷
期数:
2013年02期
页码:
215
栏目:
出版日期:
2013-04-30

文章信息/Info

Title:
Influence of parameters of explosive welding on interfacial waves of Ti/steel composite plate
作者:
王小绪何 勇
南京理工大学 机械工程学院,江苏 南京 210094
Author(s):
Wang XiaoxuHe Yong
School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
爆炸焊接 界面波 碰撞速度 碰撞角 光滑粒子动力学法
Keywords:
explosive welding interfacial waves impact velocity impact angle smoothed partiole hydrodynamics method
分类号:
O389
摘要:
为了研究爆炸焊接参数对界面波的影响,该文采用小倾角法对钛/钢进行爆炸焊接,得到了不同碰撞速度和碰撞角下连续变化的界面波。通过金相显微观察测量了不同位置界面波的波长和波高。采用光滑粒子动力学无网格方法对小倾角法爆炸焊接过程进行了数值模拟,计算出不同位置的碰撞速度、碰撞角、比压强。研究表明,碰撞速度和碰撞角是影响界面波形的关键参数,当碰撞速度为648 m/s,碰撞角为16.1°时,界面波开始生成。随着碰撞速度和碰撞角的增加,界面波波长和波高逐渐增加,比波长先减小后增加。
Abstract:
In order to study the influence of explosive welding parameters on the interfacial waves,the explosive welding experiment with small inclination is performed,and interfacial waves are obtained under different impact velocities and impact angles.The wave length and wave height are measured by the morphology of interfacial waves.The explosive welding with small inclination is numerically simulated using smoothed partiole hydrodynamics method,and the parameters of the impact velocity,the impact angle and the specific pressure are calculated.The results show that the impact velocity and impact angle are the key parameter affecting interfacial waves.When the impact velocity is 648 m/s and the impact angle is 16.1°,the interfacial waves begin to form.The wave length and wave height increase with the impact velocity and the impact angle increasing,and the specific wavelength first decreases and then increases.

参考文献/References:

[1]Crossland B.Explosive welding of metals and its application[M].Oxford, U K:Oxford University Press,1982:35-38.
[2]Bogumil W.Testing of explosive welding and welded joints:Wavy character of process and joint quality[J].International Journal of Impact Engineering,2011,38:309-313.
[3]郑哲敏,谈庆明.爆炸复合界面波的形成机理[J].力学学报,1989(2):129-139. Zheng Zhemin,Tan qingming.Mechanism of wave formation at the interface in explosive welding[J].Acta Mechanisca Sinica,1989(2):129-139.
[4]史长根,王耀华,李子全,等.爆炸焊接界面成波机理初探[J].爆破器材,2004,33(5):25-28. Shi Changgen,Wang Yaohua,Li Ziquan,et al.Study of mechanism of wave formation at the interface in explosive welding[J].Explosive Materials,2004,33(5):25-28.
[5]张登霞,李国豪.低碳钢爆炸焊接界面波与板材无量纲强度关系的试验研究[J].爆炸与冲击,1983,3(2):23-29. Zhang Dengxia,Li Guohang.An experimental relation between interface wave form of explosion welding mild steel and material dimensionless strength[J].Explosion and Shock Waves,1983,3(2):23-29.
[6]张越举,杨旭升,李晓杰,等.钛/钢复合板爆炸焊接实验[J].爆炸与冲击,2012,32(1):103-107. Zhang Yueju,Yang Xusheng,Li Xiaojie.An experimental research on explosive welding of titanium/steel clad plate[J].Explosion and Shock Waves,2012,32(1):103-107.
[7]Gulenc B.Investigation of interface properties and weldability of aluminum and copper plates by explosive welding method[J].Materials and Design,2008,29:275-278.
[8]Akbari Mousavi A A,Al-Hassani S T S.Numerical and experimental studies of the mechanism of the wavy interface formations in explosive/impact welding[J].Journal of the Mechanics and Physics of Solids,2005,53:2501-2528.
[9]Wang Yuxin,Beom H G,Sun Ming,et al.Numerical simulation of explosive welding using the material point method[J].International Journal of Impact Engineering,2011,38:51-60.
[10]Liu G R,Liu M B.Smoothed particle hydrodynamics:A meshfree particle method[M].Singapore:World Scientific,2003:20-23.
[11]李晓杰,莫非,闫鸿浩,等.爆炸焊接界面波的数值模拟[J].爆炸与冲击,2011,31(6):653-657. Li Xiaojie,Mo Fei,Yan Honghao,et al.Numerical simulation of interface waves in steel explosive welding[J].Explosion and Shock Waves,2011,31(6):653-657.
[12]Wang Xiao,Zheng Yuanyuan,Liu Huixia,et al.Numerical study of mechanism of explosive/impact welding using smoothed particle hydrodynamics method[J].Materials and Design,2012,35:210-219.

备注/Memo

备注/Memo:
收稿日期:2012-12-10修回日期:2013-03-04
基金项目:中国博士后基金(2011M500929); 部委技术基础科研项目(C1820130005); 江苏省博士后基金(1101003B)
作者简介:王小绪(1971-),男,博士生,副研究员,主要研究方向:航空宇航推进技术与理论,E-mail:wangxx@njust.edu.cn。
更新日期/Last Update: 2013-04-30