[1]杨宇宙,钱林方,徐亚栋,等.复合材料厚壁圆筒裂纹扩展的数值模拟[J].南京理工大学学报(自然科学版),2013,37(04):590.
 Yang Yuzhou,Qian Linfang,Xu Yadong,et al.Numerical simulation of crack growth of thick wall tube of composites[J].Journal of Nanjing University of Science and Technology,2013,37(04):590.
点击复制

复合材料厚壁圆筒裂纹扩展的数值模拟
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
37卷
期数:
2013年04期
页码:
590
栏目:
出版日期:
2013-08-31

文章信息/Info

Title:
Numerical simulation of crack growth of thick wall tube of composites
作者:
杨宇宙钱林方徐亚栋陈龙淼
南京理工大学 机械工程学院,江苏 南京 210094
Author(s):
Yang YuzhouQian LinfangXu YadongChen Longmiao
School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
复合材料 厚壁圆筒 裂纹萌生 裂纹扩展 扩展有限元法 位移矢量函数
Keywords:
composites thick wall lubes crack initiation crack growth extended finite element method displacement vector function
分类号:
TB332; O346.5
文献标志码:
A
摘要:
为了提高复合材料厚壁圆筒的承载能力,得到其裂纹扩展规律,基于线弹性破坏力学的扩展有限元法,采用非线性有限元软件ABAQUS,建立含损复合材料厚壁圆筒简化模型,进行模拟内压载荷作用下裂纹扩展的仿真计算,得出裂纹沿复合圆筒轴向和径向的扩展规律和复合材料各层的损伤模式。结果表明:同等载荷和边界条件作用下,起始裂纹位于端部要比位于中间部位对复合圆筒结构造成的破坏严重。
Abstract:
In order to improve the carrying capacity of the composite thick wall tube and get the law of the crack growth,based on the principles of linear elastic fracture mechanics(LEFM)and extended finite element method(XFEM),a steel-carbon fiber/epoxy composite tube with pre-existing crack are modeled to predict the development of the crack.The material model is implemented into ABAQUS standard finite element code.The different damage modes and the law of its crack growth along the axis and radial orientation of the composite tube are concluded.The results show that:with the same load and constraint condition,the damage of the composite tube caused by the crack initiated end part of the composite tube is more severe than the crack initiated middle part of the composite tube.

参考文献/References:

[1] 徐亚栋,钱林方.基于复形调优法的复合材料身管优化[J].南京理工大学学报,2005,29(6):635-638.
Xu Yadong,Qian Linfang.Optimization of composite material barrel based on complex method[J].Journal of Nanjing University of Science and Technology,2005,29(6):635-638.
[2]Plumtree A,Melo M,Dahl J.Damage evolution in a[±45]2S CFRP laminate under block loading conditions[J].International Journal of Fatigue,2010,32:139-145.
[3]Sukumar N,Srolovitz D J,Baker T J,et al.Brittle fracture in polycrystalline microstructures with the extended finite element method[J].International Journal for Numerical Methods in Engineering,2003,56:2015-2037.
[4]Kim J S,Yoon H J,Shin K B.A study on crushing behaviors of composite circular tubes with different reinforcing fibers[J].International Journal of Impact Engineering,2011,38:198-207.
[5]杨宇宙,钱林方.复合材料厚壁圆筒的损伤问题[J].材料科学与工程学报,2012,30(2):256-261.
Yang Yuzhou,Qian Linfang.Failure analysis of carbon fiber epoxy composite thick wall tube[J].Journal of Materials Science and Engineering,2012,30(2):256-261.
[6]Ghasemnejad H,Blackman B R K,Hadavinia H,et al.Experimental studies on fracture characterizations and energy absorption of GFRP composite box structures[J].Composites Structure,2009,88(2):53-61.
[7]Donadon M V,Iannucci L,Falzon B G,et al.A progressive failure model for composite laminates subjected to low velocity impact damage[J].International Journal of Impact Engineering,2008,86:1232-1252.
[8]McCartney L N.Energy methods for fatigue damage modeling of laminates[J].Composites Science and Technology,2008,68:2601-2615.

相似文献/References:

[1]张中利,于存贵,马大为,等.复合材料定向管动力响应及优化分析[J].南京理工大学学报(自然科学版),2009,(03):315.
 ZHANG Zhong-li,YU Cun-gui,MA Da-wei,et al.Dynamic Response and Optimization for Composites Directional Tube[J].Journal of Nanjing University of Science and Technology,2009,(04):315.
[2]于存贵,卓艾宝,徐合刚.复合材料定向管刚度优化设计[J].南京理工大学学报(自然科学版),2012,36(06):0.
 YU Cun gui,ZHUO Ai bao,XU He gang.Optimum Design of Stiffness for Composite Materials Launching Guider[J].Journal of Nanjing University of Science and Technology,2012,36(04):0.
[3]万 水*,胡 红,周荣星.FRP桥面板结构特点与实例[J].南京理工大学学报(自然科学版),2005,(01):17.
 WAN Shui,HU Hong,ZHOU Rong-xing.Structural Characteristics of FRP Bridge Decks and Its Application Instance in Bridge Engineering[J].Journal of Nanjing University of Science and Technology,2005,(04):17.
[4]陈龙淼,钱林方,徐亚栋.树脂基复合材料身管热性能改良分析[J].南京理工大学学报(自然科学版),2005,(03):253.
 CHEN Long-miao,QIAN Lin-fang,XU Ya-dong.Improvement Analysis of Thermal Characteristics for Composite Barrel with Resin Matrix[J].Journal of Nanjing University of Science and Technology,2005,(04):253.
[5]杜仕国,吉法祥,陈明华.AN/PU复合材料基体的共混改性研究[J].南京理工大学学报(自然科学版),1993,(03):31.
[6]杜仕国,吉法祥,陈明华.偶联剂对AN/PU复合材料性能的影响[J].南京理工大学学报(自然科学版),1993,(03):35.
[7].美国重视坦克隐身技术[J].南京理工大学学报(自然科学版),1992,(01):21.
[8]王熙.复合材料叠层圆柱壳体的弹性理论解[J].南京理工大学学报(自然科学版),1990,(01):74.
 Wang Xi.Elasticity Theory Solution for Composite Laminated Circular Shell[J].Journal of Nanjing University of Science and Technology,1990,(04):74.
[9]冯思艳,李海文,沈家瑶.用C型拉伸试样测定厚壁圆筒线弹性断裂韧度K_(1c)[J].南京理工大学学报(自然科学版),1983,(02):171.
[10]高振儒,方 向,赵惠昌,等.复合材料雷体的UWB-EMP耦合效应研究[J].南京理工大学学报(自然科学版),2014,38(04):451.
 Gao Zhenru,Fang Xiang,Zhao Huichang,et al.Coupling effect of UWB-EMP on landmine shell made with composite materials[J].Journal of Nanjing University of Science and Technology,2014,38(04):451.
[11]钱林方,余海.复合材料圆筒的材料有效使用研究[J].南京理工大学学报(自然科学版),2000,(03):240.
 QianLinfang YuHai.A Study of Effective Application of Composite Materials in Cylinder[J].Journal of Nanjing University of Science and Technology,2000,(04):240.

备注/Memo

备注/Memo:
收稿日期:2012-06-07 修回日期:2012-11-28
基金项目:国家自然科学基金(51205206)
作者简介:杨宇宙(1983-),男,博士生,主要研究方向:复合材料身管,E-mail:453223072@qq.com。
更新日期/Last Update: 2013-08-31