[1]陶丽佳,王禹林,周 斌,等.人工扰动下螺杆转子成形磨削的廓形误差分析[J].南京理工大学学报(自然科学版),2013,37(05):664.
　Tao Lijia,Wang Yulin,Zhou Bin,et al.Profile error analysis of form grinding for screw rotor under artificial perturbatance[J].Journal of Nanjing University of Science and Technology,2013,37(05):664.
点击复制

人工扰动下螺杆转子成形磨削的廓形误差分析
分享到：

《南京理工大学学报》（自然科学版）[ISSN:1005-9830/CN:32-1397/N]

卷:
37卷
期数:
2013年05期
页码:
664
栏目:
出版日期:
2013-10-31

文章信息/Info

Title:
Profile error analysis of form grinding for screw rotor under artificial perturbatance
作者:
陶丽佳1; 王禹林1; 周 斌2; 冯虎田1; 王晓锋1
1.南京理工大学 机械工程学院,江苏 南京 210094; 2.汉江机床有限公司,陕西 汉中 723003
Author(s):
Tao Lijia1; Wang Yulin1; Zhou Bin2; Feng Hutian1; Wang Xiaofeng1
1.School of Mechanical Engineering,NUST,Nanjing 210094,China; 2.Hanjiang Machine Tool Co Ltd,Hanzhong 723003,China
关键词:
螺杆转子;  廓形误差;  成形磨削
Keywords:
screw rotors;  profile errors;  form grinding
分类号:
TH161.12
文献标志码:
A
摘要:
螺杆转子的形状精度直接影响螺杆压缩机的性能。为分析成形磨削加工螺杆转子的廓形误差,该文基于砂轮-转子间的坐标变换及啮合原理,以转子整体廓形误差为评价指标,提出了一种螺杆转子廓形误差分析方法。通过调整砂轮的安装参数,分析了人工扰动下成形磨削螺杆转子的实际廓形,得到砂轮各安装误差对螺杆转子廓形精度的影响规律及程度。结果表明,砂轮安装角误差和砂轮与转子中心距的误差导致转子廓形缩放,砂轮轴向位置误差导致转子廓形自转,且砂轮安装参数对阳转子廓形的影响大于对阴转子廓形的影响。
Abstract:
The profile accuracy of the screw rotor affects the performance of the screw compressor.To analyze the profile error of the screw rotor under form grinding,the overall rotor profile error is taken as the evaluation index,the engagement theory and the coordinate transformation between the grinding wheel and the screw rotor are considered,and then an error analysis on the screw rotor profile is proposed.To study the installation error impact on the accuracy of the screw rotor profile,the installation parameters of the grinding wheel are adjusted,and the real profile of the screw rotor under artificial disturbance is analyzed.The results show that the installation angle error of the grinding wheel and the center distance error between the grinding wheel and the rotor result in the the rotor profile variation.The axial position error of the grinding wheel also results in the rotor profile rotation.The grinding wheel installation parameters have more influence on the male rotor profile than on the female one.

参考文献/References:

[1] 邢子文,吴华根,束鹏程.螺杆压缩机设计理论与关键技术的研究和开发[J].西安交通大学学报,2007,41(7):755-763.
Xing Ziwen,Wu Huagen,Shu Hengcheng.Researchand development on design theory and key technology of screw compressors[J].Journal of Xi'an Jiaotong University,2007,41(7):755-763.
[2]Wei Jing,Zhang Guanghui.A precision grinding method for screw rotors using CBN grinding wheel[J].The International Journal of Advanced Manufacturing Technology,2010,48(5):495-503.
[3]李瑰贤,马亮,林少芬.斜齿轮副静态传递误差的模糊计算方法[J].南京理工大学学报,2001,25(4):378-382.
Li Guixian,Ma Liang,Lin Shaofen.Fuzzy computing for static transmission error of helical gear pair[J].Journal of Nanjing University of Science and Technology,2001,25(4):378-382.
[4]李瑰贤,温建民,刘福利,等.交错轴非渐开线变厚齿轮齿形误差与齿向误差的分析[J].南京理工大学学报,2005,28(6):585-589.
Li Guixian,Wen Jianmin,Liu Fuli,et al.Profile errors and axial errors of noninvolute beveloid gears with crossed axes[J].Journal of Nanjing University of Science and Technology,2005,28(6):585-589.
[5]Stosic N.A geometric approach to calculating tool wear in screw rotor machining[J].International Journal of Machine Tools and Manufacture,2006,46(15):1961-1965.
[6]Stosic N.Evaluating errors in screw rotor machining by tool to rotor transformation[J].Journal of Engineering Manufacture,2006,220(10):1589-1596.
[7]Guo Changsheng,Tang Yang.Influence of process parameters on screw rotor profiles[J].Machining Science and Technology,2003,7(1):105-118.
[8]王可.复杂异形螺旋曲面无瞬心包络铣削理论及应用技术研究[D].天津:天津大学机械工程学院,2003:52-58.
[9]Shen Z H,Lu R S,Zhang Z S,et al.Research on calculation and smoothing of grinding wheel profile for machining screw rotor[J].Advanced Materials Research,2011(291):2383-2387.
[10]赵巍,唐石军,蔡玉俊.螺杆截面形状的数值拟合方法研究[J].天津工程师范学院学报,2010,20(3):5-8.
Zhao Wei,Tang Shijun,Cai Yujun.Research on the numerical fitting method to spiral rod cross-section[J].Journal of Tianjin University of Technology and Education,2010,20(3):5-8.
[11]陆如升,沈志煌,彭丽文,等,磨削螺杆转子砂轮截形计算与仿真验证[J].厦门大学学报(自然科学版),2011.50(5):852-855.
Lu Rusheng,Sheng Zhihuang,Peng Liwen,et al.Calculation of grinding wheel profile and 3D simulation for grinding screw rotor flute[J].Journal of Xiamen University(Natural science),2011,50(5):852-855.

备注/Memo

备注/Memo:
收稿日期:2013-01-25 修回日期:2013-07-05
基金项目:国家科技重大专项(2011ZX04003-021)
作者简介:陶丽佳(1987-),女,博士生,主要研究方向:螺杆转子高精磨削等,E-mail:taolijia10111@163.com; 通讯作者:王禹林(1981-),男,博士,讲师,主要研究方向:螺纹加工、精密测控技术等,E-mail:wyl_sjtu@126.com。
更新日期/Last Update: 2013-10-31