[1]陈龙淼,林 贵,李 淼.弹丸高速挤进过程动态试验设计与分析[J].南京理工大学学报(自然科学版),2015,39(02):139-143.
 Chen Longmiao,Lin Gui,Li Miao.Design and analysis of dynamic experiment for engraving process of high-speed projectile[J].Journal of Nanjing University of Science and Technology,2015,39(02):139-143.
点击复制

弹丸高速挤进过程动态试验设计与分析
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
39卷
期数:
2015年02期
页码:
139-143
栏目:
出版日期:
2015-04-30

文章信息/Info

Title:
Design and analysis of dynamic experiment for engraving process of high-speed projectile
作者:
陈龙淼林 贵李 淼
南京理工大学 机械工程学院,江苏 南京 210094
Author(s):
Chen LongmiaoLin GuiLi Miao
School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
挤进过程 有限元模拟 机械设计
Keywords:
engraving process finite element simulation mechanical design
分类号:
TJ410
摘要:
该文设计一种可反复使用的动态模拟弹丸挤进过程的机电实验装置,用于模拟弹丸高速挤进膛线的塑性变形过程,通过仿真分析试验装置中撞击体碰撞和推杆推动弹丸挤进膛线的过程,获得了推杆和弹丸的运动状态以及挤进动力和挤进阻力随时间的变化曲线。仿真计算发现,挤进最大阻力值与常用的经验挤进阻力值相差小于10%,表明该动态试验装置能有效模拟弹丸动态的挤进过程,所采用的仿真分析模型和参数选取合理,能为深入研究挤进规律提供有效试验手段和仿真方法。
Abstract:
A reusable electromechanical experimental device for the dynamic engraving process is designed to simulate the plastic deformation of the projectile engrave rifling with high speeds.The collision process of impactors and the engraving process of bands pushed by pushrod are simulated and analyzed.The motion state of the projectile and the pushrod and the curve of the engraving resistance versus time of bands are obtained.The results show that the difference between the maximum resistance value of calculation and the common resistance value of experience is less than 10%,the experimental device can achieve the function of the engraving experiment,and the simulation model and the parameters of the dynamic engraving process are reasonable.The research in this paper can provide the effective test method and the simulation methods for the future study of the engraving law.

参考文献/References:

[1] Montgomery R S.Friction and wear mechanism at high sliding speeds[J].Wear,1976,36:275-298.
[2]Lisov M.Modeling wear mechanism of artillery projectiles rotating band using variable parameters of internal ballistic process[J].Scientific-Technical Review,2006,VI.2:11-16.
[3]Andrews T D.Projectile driving band interactions with gun barrels[J].J Press Vess Tech,2006,128:273-278.
[4]Carlucci D,Vega J,Pocock M,et al.Novel examination of gun bore resistance-analysis and experimental validation[A].Proceedings of the 23rd International Symposium of Ballistics[C].Tarragona,Spain:[s.n.],2007:313-320.
[5]彭志国,周彦煌,齐丽婷.火炮内膛涂油弹炮接触熔化热流体模型与分析[J].南京理工大学学报,2008,32(1):13-17.
Peng Zhiguo,Zhou Yanhuang,Qi Liting.Model and analysis of melt-lubrication between band and tube with oil on gun internal surface[J].Journal of Nanjing Univ-ersity of Science and Technology,2008,32(1):13-17.
[6]Sun Heyang,Ma Jisheng,Yao Jiajun,et al,Dynamic analysis on the rotating band's engraving process[J].Advanced Materials Research,2010(139):1285-1288.
[7]Johnson G R,Cook W H.Fracture characteristics of three metals subjected to various strains,strain rates,temperatures and pressures[J].Engineering Fracture Mechanics,1985,21(1):31-48.
[8]Steinberg D J,Coehran S G,Guinan M W.A constitutive model for metals applicable at high strain rate[J].J Appl Phys,1980,51(3):1498-1503.
[9]何勇.挤进过程实验研究[J].弹道学报,1996,8(4):33-36.
He Yong.The experimental research of engraving process[J].Journal of Ballistics,1996,8(4):33-36.
[10]金志明.枪炮内弹道学[M].北京:北京理工大学出版社,2004.

相似文献/References:

[1]祖莉,梁医,王华坤.商用乘骑式割草车刀盘的模拟与改进[J].南京理工大学学报(自然科学版),2011,(06):832.
 ZU Li,LIANG Yi,WANG Hua-kun.Simulation and Improvement of Commercial Riding Lawn-mower’s Deck[J].Journal of Nanjing University of Science and Technology,2011,(02):832.
[2]邹华.高过载微型加速度计结构设计及数值模拟[J].南京理工大学学报(自然科学版),2010,(03):319.
 ZOU Hua.Structure Design and Numerical Simulation of High-g Micro Accelerometer[J].Journal of Nanjing University of Science and Technology,2010,(02):319.

备注/Memo

备注/Memo:
收稿日期:2014-01-07 修回日期:2014-03-18
基金项目:国家自然科学基金(51205207)
作者简介:陈龙淼(1979-),男,博士,副教授,主要研究方向:结构与优化,E-mail:13913870745@139.com。
引文格式:陈龙淼,林贵,李淼.弹丸高速挤进过程动态试验设计与分析[J].南京理工大学学报,2015,39(2):139-143.
投稿网址:http://zrxuebao.njust.edu.cn
更新日期/Last Update: 2015-04-30