[1]梁传建,杨国来,王晓锋.发射载荷作用下火炮座圈动态响应研究[J].南京理工大学学报(自然科学版),2015,39(03):247.
 Liang Chuanjian,Yang Guolai,Wang Xiaofeng.Dynamic response of gun seat ring under launching load[J].Journal of Nanjing University of Science and Technology,2015,39(03):247.
点击复制

发射载荷作用下火炮座圈动态响应研究
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
39卷
期数:
2015年03期
页码:
247
栏目:
出版日期:
2015-06-30

文章信息/Info

Title:
Dynamic response of gun seat ring under launching load
作者:
梁传建杨国来王晓锋
南京理工大学 机械工程学院,江苏 南京 210094
Author(s):
Liang ChuanjianYang GuolaiWang Xiaofeng
School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
发射载荷 火炮座圈 动态响应 非线性有限元 滚子 座圈内外滚道 赫兹理论 隐式积分算法 接触力 接触应力
Keywords:
launching load gun seat ring dynamic response nonlinear finite element cylindrical rollers seat ring raceway Hertz theory implicit integration algorithm contact force contact pressure
分类号:
TJ302
摘要:
为了研究火炮射击时座圈的动态响应,充分考虑了构件之间特别是滚子与座圈内外滚道的接触碰撞关系,建立了某火炮上装部分的非线性有限元动力学模型。基于传统理论对座圈进行了静力分析。将有限元静力分析结果与赫兹理论计算结果进行对比,验证了有限元模型的合理性。采用动态隐式积分算法对发射载荷作用下座圈的动态接触问题进行分析,获得了座圈的接触力和接触应力的变化规律,并将结果与传统理论的静力分析结果进行了比较。结果表明有限元动力分析获得的座圈最大接触力和接触应力比传统理论的计算结果分别大约30%和45%,传统理论在座圈受力分析中具有一定的局限性,有限元动力分析结果更符合实际情况。
Abstract:
Considering the contact impact between interacting components especially cylindrical rollers and raceway inside and outside the seat ring,a nonlinear finite element dynamic model of a large caliber gun is established to study the dynamic response of the gun seat ring during gun firing.Static analysis of the seat ring is made based on traditional theory.The static analysis results of the finite element method are compared with those of Hertz theory,and the correctness of the finite element method is verified.The dynamic contact problem of the seat ring under launching load is analyzed using dynamic implicit integration algorithm,and the variation rules of contact force and contact pressure of the seat ring are obtained.The dynamic analysis results of the finite element method are compared with the static analysis results of traditional theory.The results show that the maximum contact force and the peak contact stress obtained by the finite element method are greater than traditional theory calculation results by 30% and 45% respectively,traditional theory has certain limitations in force analysis of gun seat rings,and the analysis results of the finite element method are more suitable for actual formations.

参考文献/References:

[1] 余海东,丁晟,张凯之,等.盾构机主轴回转支承轴承刚度及变形特性研究[J].中国机械工程,2011,22(4):452-457.
Yu Haidong,Ding Sheng,Zhang Kaizhi,et al.Study on stiffness and deformation behavior of slewing bearing in shield machines[J].China Mechanical Engineering,2011,22(4):452-457.
[2]徐弘毅,张晨辉.基于塑性材料模型的滚动轴承有限元分析[J].机械工程学报,2010,46(11):29-35.
Xu Hongyi,Zhang Chenhui.Finite element analysis of roller bearing based on the plastic material models[J].Journal of Mechanical Engineering,2010,46(11):29-35.
[3]尚振国,董惠敏,毛范海,等.具有塑性变形的转盘轴承有限元分析方法[J].农业工程学报,2011,27(12):52-56.
Shang Zhenguo,Dong Huimin,Mao Fanhai,et al.Finite element analysis method of slewing bearing with plastic deformation[J].Transactions of the Chinese Society of Agricultural Engineering,2011,27(12):52-56.
[4]李昌,韩兴.基于显式动力学的齿轮箱动态有限元数字仿真[J].兵工学报,2009,30(7):978-983.
Li Chang,Han Xing.Digital finite element simulation of gear box based on explicit dynamics[J].Acta Armamentarii,2009,30(7):978-983.
[5]林腾蛟,荣崎,李润方,等.深沟球轴承运转过程动态特性有限元分析[J].振动与冲击,2009,28(1):118-122.
Lin Tengjiao,Rong Qi,Li Runfang,et al.Finite element analysis for dynamic characteristic of a deep-groove ball bearing in motion process[J].Journal of Vibration and Shock,2009,28(1):118-122.
[6]童宝宏,刘颖,苏荭.滚动轴承动态接触特性数值模拟中若干问题[J].机械工程学报,2012,48(21):116-123.
Tong Baohong,Liu Ying,Su Hong.Some issues in numerical simulation of dynamic contacting nature of roller bearing[J].Journal of Mechanical Engineering,2012,48(21):116-123.
[7]曾晋春,杨国来,王晓锋.考虑轴承接触/碰撞的某火炮动力学数值仿真[J].火炮发射与控制学报,2010,31(1):30-33.
Zeng Jinchun,Yang Guolai,Wang Xiaofeng.Dynamics numerical simulation for a certain gun in consideration of contact/impact among parts in traverse bearing[J].Journal of Gun Launch and Control,2010,31(1):30-33.
[8]刘朋科,史婉荣,郭新喜,等.大口径火炮座圈整体结构动态响应研究[J].火炮发射与控制学报,2012,33(3):68-71.
Liu Pengke,Shi Wanrong,Guo Xinxi,et al.Dynamic response research of overall structure of large caliber gun turret race[J].Journal of Gun Launch and Control,2012,33(3):68-71.
[9]王大力,孙立明,单服兵,等.ANSYS在求解轴承接触问题中的应用[J].轴承,2002,9(9):1-4.
Wang Dali,Sun Liming,Shan Fubing,et al.Application of ANSYS software in solution of contact problem of bearing[J].Bearing,2002,9(9):1-4.
[10]华恭,伊玲益.炮架设计[M].北京:国防工业出版社,1982.

备注/Memo

备注/Memo:
收稿日期:2014-06-21 修回日期:2014-12-10
作者简介:梁传建(1986-),男,博士生,主要研究方向:结构动力学分析及优化设计,E-mail:lcj19@163.com; 通讯作者:杨国来(1968-),男,教授,博士生导师,主要研究方向:机械系统动力学及动态设计,E-mail:yyanggl@njust.edu.cn。
引文格式:梁传建,杨国来,王晓锋.发射载荷作用下火炮座圈动态响应研究[J].南京理工大学学报,2015,39(3):347-352.
投稿网址:http://zrxuebao.njust.edu.cn
更新日期/Last Update: 2015-06-30