[1]王良模,王文源,张一京,等.基于模态分析的某越野车动力总成壳体结构优化[J].南京理工大学学报(自然科学版),2015,39(03):358.
 Wang Liangmo,Wang Wenyuan,Zhang Yijing,et al.Structural optimizing of powertrain housing of off-road vehicle based on modal analysis[J].Journal of Nanjing University of Science and Technology,2015,39(03):358.
点击复制

基于模态分析的某越野车动力总成壳体结构优化
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
39卷
期数:
2015年03期
页码:
358
栏目:
出版日期:
2015-06-30

文章信息/Info

Title:
Structural optimizing of powertrain housing of off-road vehicle based on modal analysis
作者:
王良模1王文源1张一京2陈荣华2袁刘凯2张汤赟2
1.南京理工大学 机械工程学院,江苏 南京 210094; 2.南京依维柯汽车有限公司,江苏 南京 210028
Author(s):
Wang Liangmo1Wang Wenyuan1Zhang Yijing2Chen Ronghua2 Yuan Liukai2Zhang Tangyun2
1.School of Mechanical Engineering,NUST,Nanjing 210094,China; 2.Nanjing Iveco Automobile Co.,Ltd.,Nanjing 210028,China
关键词:
动力总成 壳体 模态分析 共振 应变能密度 加强筋 刚度
Keywords:
powertrain housing modal analysis resonance strain energy density ribs stiffness
分类号:
U461.91
摘要:
针对某越野车在行驶路况复杂、载荷多变等情况下,动力总成壳体出现开裂的现象,运用有限元模态分析和模态试验相结合的方法,研究了动力总成的振动模态。一阶、二阶模态固有频率较低,容易形成共振,使壳体的应变能密度较高、分动器壳体连接处的振幅较大,导致壳体开裂。采用在壳体高应变能密度区域增加加强筋的方法提高刚度,通过增加连接点和在周边布置加强筋减小振幅。仿真结果表明:该方法提高了动力总成的固有频率,降低了应变能密度,避开了发动机常用转速下的共振频率,有效防止了壳体开裂。
Abstract:
Aiming at the rupture of powertrain housing for an off-road vehicle because of the complex road conditions,changing loads and so on,the vibration mode of the powertrain is researched using the finite element modal analysis and modal experiments.The first order modal natural frequency and second order modal natural frequency of the powertrain are low and easy to form a resonance,the strain energy density of the housing is high and the amplitude at the connection of the transfer case housing is large,which cause the rupture of the powertrain housing.Ribs are added in the high strain energy density area of the transmission housing to improve the stiffness,connecting points are increased and ribs are added in the surrounding to reduce the amplitude.Simulation results show that the natural frequency of the optimized powertrain is improved,the strain energy density is reduced,the resonance frequency under the common engine speed is avoided,so that the rupture of the powertrain housing is prevented.

参考文献/References:

[1] Hwang S J,Chen J S,Liu L,et al.Modeling and simulation of a powertrain-vehicle system with automatic transmission[J].International Journal of Vehicle Design,2000,23(1):145-160.
[2]郑伟娟,李元宝.应用振动ODS方法分析汽车动力总成振动[J].汽车技术,2007(9):31-33.
Zheng Weijuan,Li Yuanbao.Analysis on vibration of vehicle powertrain by using ODS method[J].Automobile Technology,2007(9):31-33.
[3]Yadav V,Londhe A V,Khandait S M.Correlation of test with CAE of dynamic strains on transmission housing for 4WD automotive powertrain[A].SAE 2010 World Congress & Exhibition[C].Detroit,Michigan,USA:SAE International,2010.
[4]孟浩东,李舜酩,白莹,等.柴油机动力总成异常振动试验分析[J].振动、测试与诊断,2011,31(6):675-678.
Meng Haodong,Li Shunming,Bai Ying,et al.Abnormal vibration analysis for power assembly of diesel engine[J].Journal of Vibration,Measurement & Diagnosis,2011,31(6):675-678.
[5]王亚楠,吕振华.商用车多刚体动力装置-悬置系统振动模态特性与系统匹配分析[J].中国机械工程,2011,22(18):2253-2258.
Wang Yanan,Lv Zhenhua.A study of vibrational modal characteristics of commercial vehicle multi-rigid-body powertrain with mounting systems[J].China Mechanical Engineering,2011,22(18):2253-2258.
[6]袁敏刚,陈晓峰,尹晓飞.基于模态分析的乘用车变速器壳体振动优化设计[J].机械工程与自动化,2012(6):80-82.
Yuan Mingang,Chen Xiaofeng,Yin Xiaofei.Optimum vibration design of transmission housing for passenger car by modal analysis[J].Mechanical Engineering & Automation,2012(6):80-82.
[7]王源隆,王良模,余有平,等.安装中央制动器的变速器后壳改进设计与仿真[J].机械传动,2012,36(2):42-45.
Wang Yuanlong,Wang Liangmo,Yu Youping,et al.Improved design and simulation of transmission rear case with central brake[J].Journal of Mechanical Transmission,2012,36(2):42-45.
[8]章骏.IVECO越野汽车动力传动系统动态特性的试验研究[D].南京:南京理工大学机械工程学院,2003.
[9]Ward H,Lammens S,Sas P.模态分析理论与试验[M].白化同,郭继忠,译.北京:北京理工大学出版社,2001.
[10]Xu Y,Zhan Z,Chen W,et al.Study about the relationship between power-train modal and connecting-plane[A].Proceedings of the FISITA 2012 World Automotive Congress[C].Berlin,Germany:Springer Berlin Heidelberg,2013:235-247.

相似文献/References:

[1]王熙.复合材料叠层圆柱壳体的弹性理论解[J].南京理工大学学报(自然科学版),1990,(01):74.
 Wang Xi.Elasticity Theory Solution for Composite Laminated Circular Shell[J].Journal of Nanjing University of Science and Technology,1990,(03):74.

备注/Memo

备注/Memo:
收稿日期:2013-08-04 修回日期:2014-06-09
基金项目:江苏省产学研前瞻性联合研究项目(BY2009109); 南京市产学研合作项目(201306011)
作者简介:王良模(1963-),男,教授,博士生导师,主要研究方向:车辆系统动力学、车辆动态模拟与仿真,E-mail:liangmo@njust.edu.cn。
引文格式:王良模,王文源,张一京,等.基于模态分析的某越野车动力总成壳体结构优化[J].南京理工大学学报,2014,39(3):358-362.
投稿网址:http://zrxuebao.njust.edu.cn
更新日期/Last Update: 2015-06-30