[1]廖海波,孙朝翔.高固体含能材料裂纹扩展黏性域模型应用研究[J].南京理工大学学报(自然科学版),2015,39(05):511.
 Liao Haibo,Sun Chaoxiang.Application of cohesive zone model for crack growth in energetic material with high solid particle content[J].Journal of Nanjing University of Science and Technology,2015,39(05):511.
点击复制

高固体含能材料裂纹扩展黏性域模型应用研究
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
39卷
期数:
2015年05期
页码:
511
栏目:
出版日期:
2015-10-31

文章信息/Info

Title:
Application of cohesive zone model for crack growth in energetic material with high solid particle content
作者:
廖海波1孙朝翔2
1.安徽省神剑科技股份有限公司,安徽 合肥 230061;
2.南京理工大学 机械工程学院,江苏 南京 210094
Author(s):
Liao Haibo1Sun Chaoxiang2
1.Anhui Shenjian Technology Co Ltd,Hefei 230061,China;
2.School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
黏性域模型 含能材料 界面力学模型 裂纹扩展
Keywords:
cohesive zone model energetic materials interfacial mechanics model crack growth
分类号:
V512
摘要:
针对含能粒子与基体的界面脱黏对高固体含能材料宏观力学性能的影响,该文基于黏性域模型基本理论和高固体含能材料的界面力学模型,采用界面黏性域模型对高固体含能材料的断裂过程进行了数值模拟,模拟结果与Tan的断裂实验数据较一致。分析了基于界面黏性域模型的高固体含能材料的裂纹扩展特点。结果显示,在裂纹扩展过程中最大应力始终位于裂纹尖端前方某一区域。计算模型与实验模型的一致性表明,黏性域模型可用于高固体含能材料断裂性能的研究。
Abstract:
In view of that the debonding of energetic particle/matrix interfaces has important effect on the macroscopic behavior of energetic materials with high solid particle content,the basic theory of cohesive zone model and the interfacial mechanics model for energetic materials are presented here.The cohesive zone model is used to simulate the crack growth in energetic materials with the high solid particle content.The results of numerical simulations are in agreement with the results of Tan's experiments.By analyzing the characteristic of crack propagation in high energetic materials,it is known that the maximum stress zone is ahead of the crack tip in the whole crack growth process.The simulation results are in accordance with the experiment results,verifying that the cohesive zone model can be used for the mechanics studies of the energetic materials with the high solid particle content.

参考文献/References:

[1] 袁嵩,汤卫红,李高春.复合推进剂的细观失效机理分析[J].固体火箭技术,2006,29(1):48-51.
Yuan Song,Tang Weihong,Li Gaochun.Analysis of micro failure mechanism of composite propellant[J].Journal of Solid Rocket Technology,2006,29(1):48-51.
[2]彭威,郑坚,白鸿柏,等.复合推进剂微观裂纹损伤本构模型研究[J].固体火箭技术,2003,26(2):33-37.
Peng Wei,Zheng Jian,Bai Hongbai,et al.Study on damage constitutive model of composite propellant micro crack[J].Journal of Solid Rocket Technology,2003,26(2):33-37.
[3]彭威,任均国,周建平.复合固体推进剂脱湿模型的研究[J].固体火箭技术,2000,23(2):48-51.
Peng Wei,Ren Junguo,Zhou Jianping.Study on dewetting model of composite solid propellant[J].Journal of Solid Rocket Technology,2000,23(2):48-51.
[4]Needleman A.A continuum model for void nucleation by inclusion debonding[J].Journal Application of Mechanics,1987,54:525-531.
[5]Tan H,Liu C,Huang Y,et al.The cohesive law for the particle/matrix interfaces in high explosives[J].Journal of the Mechanics and Physics of Solids,2005,53:1892-1917.
[6]Tan H,Huang Y,Liu C,et al.The Mori-Tanaka method for composite materials with nonlinear interface debonding[J].International Journal of Plasticity,2005,21:1890-1918.
[7]Chen Changrong,Mai Yiuwing.Comparison of cohesive zone model and linear elastic fracture mechanics for a modeI crack near a compliant/stiff interface[J].Engineering Fracture Mechanics,2010,77:3408-3417.
[8](美)阿方萨斯·V·波丘斯.黏接与胶黏剂技术导论[M].潘顺龙,赵飞,许关利,译.北京:化学工业出版社,2005.
[9]Yakov Benveniste.A new approach to the application of Mori-Tanaka's theory in composite materials[J].Mechanics of Materials,1987,6(2):147-157.

备注/Memo

备注/Memo:
收稿日期:2015-01-29 修回日期:2015-04-16
作者简介:廖海波(1976-),男,硕士,高级工程师,主要研究方向:弹药总体技术,E-mail:liaohaibo990@163.com。
引文格式:廖海波,孙朝翔.高固体含能材料裂纹扩展黏性域模型应用研究[J].南京理工大学学报,2015,39(5):511-515.
投稿网址:http://zrxuebao.njust.edu.cn
DOI:10.14177/j.cnki.32-1397n.2015.39.05.001
更新日期/Last Update: 2015-10-31