[1]魏志芳,王 芳,李晓光,等.枪、弹等多领域协同设计系统构建[J].南京理工大学学报(自然科学版),2016,40(02):156.[doi:10.14177/j.cnki.32-1397n.2016.40.02.005]
 Wei Zhifang,Wang Fang,Li Xiaoguang,et al.Multi-region collaborative design system construction for gun and bullet and other subsystem[J].Journal of Nanjing University of Science and Technology,2016,40(02):156.[doi:10.14177/j.cnki.32-1397n.2016.40.02.005]
点击复制

枪、弹等多领域协同设计系统构建
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
40卷
期数:
2016年02期
页码:
156
栏目:
出版日期:
2016-04-30

文章信息/Info

Title:
Multi-region collaborative design system construction for gun and bullet and other subsystem
文章编号:
1005-9830(2016)02-0156-09
作者:
魏志芳1王 芳1李晓光1胡艳岭2黄 静2郭 施2
1.中北大学 机电工程学院,山西 太原 030051; 2.中国兵器工业第208研究所 信息中心,北京 102202
Author(s):
Wei Zhifang1Wang Fang1Li Xiaoguang1Hu Yanling2Huang Jing2Guo Shi2
1.College of Mechatronic Engineering,North University of China,Taiyuan 030051,China; 2.Information Center,No 208 Research Institute of China Ordnance Industries,Beijing 102202,China
关键词:
轻武器 协同设计 优化 自顶向下 多领域
Keywords:
small arms collaborative design optimization top-down multi-regions
分类号:
TH166; TJ202
DOI:
10.14177/j.cnki.32-1397n.2016.40.02.005
摘要:
针对轻武器产品集中设计时间长、效率低的研发现状,研究了枪、弹等多领域各模块基于网络跨地域协同设计优化的系统构建及技术实现。通过分析轻武器产品多领域的协同业务需求,构建了轻武器产品跨地域的协同研制应用环境,研究了枪、弹等多领域协同设计与优化的模型架构,以及轻武器产品自顶向下协同设计的流程和实现技术,形成了多厂所之间基于网络开展异地协同设计的方式方法。应用实例表明,该协同设计系统及方法能够有效提高轻武器产品设计效率,降低研发成本。
Abstract:
In view of the developing status of long-lasting and ineffective concentrating design for small arms,a multi-region collaborative design optimization system for gun and bullet and other systems based on the internet is studied here.By analyzing the coupling relations and collaborative request among subsystems of gun and bullet in the designing process of small arms,the multi-region collaborative development system is constructed,the collaborative design and optimization model frame is established,and the top-down design flow and achieving technology are studied.Consequently,the corresponding collaborative design method is created for achieving the multi-region collaborative design in multi-factories by the internet.The practical example proves that the design efficiency of small arms is improved and the development cost is decreased by using the collaborative design system and the presented method.

参考文献/References:

[1] Bouikni N,Rivest L,Desrochers A.A multiple views management system for concurrent engineering and PLM[J].Concurrent Engineering:Research and Applications,2008,16(1):61-72.
[2]李峰,徐诚,赵彦峻.面向并行工程的轻武器协同设计研究[J].南京理工大学学报,2008,37(2):214-218.
Li Feng,Xu Cheng,Zhao Yanjun.Collaborative design of smallarms for concurrent engineering[J].Journal of Nanjing University of Science and Technology,2008,37(2):214-218.
[3]胡志刚,何卡曼.协同优化技术在自动武器设计中的应用与实现[J].弹道学报,2006,18(3):58-61.
Hu Zhigang,He Kaman.Application and realization of collaborative optimization technique on design of automatic weapons[J].Journal of Ballistics,2006,18(3):58-61.
[4]洪亚军.单兵武器协同仿真与系统优化设计研究[D].南京:南京理工大学机械工程学院,2012.
[5]汪周斌,秦兵才.WAVE技术及其在导弹总体结构研制上的应用[J].科技信息,2011(16):359.
Wang Zhoubin,Qin Bingcai.Applicatin of UG/WAVE technology on general structure design for missiles[J].Science & Technology Information,2011(16):359.
[6]吴国洋,李国云,蒋成荣,等.UG/WAVE技术及其应用[J].信息技术,2008,30:31-32.
Wu Guoyang,Li Guoyun,Jiang Chengrong,et al.UG/WAVE technology and application[J].Science & Technology Information,2008,30:31-32.
[7]徐夕玲,张翼,吕彩琴,等.基于UG/WAVE的柴油机连杆组自顶向下参数化设计[J].内燃机车,2010(4):22-24.
Xu Xiling,Zhang Yi,Lv Caiqin.UG/WAVE-based top-down parametric design of diesel engine connecting rod group[J].Diesel Locomotives,2010(4):22-24.
[8]王威,范文慧,肖田元.复杂产品多学科协同设计优化建模方法[J].系统仿真学报,2010,22(11):2524-2527.
Wang Wei,Fan Wenhui,Xiao Tianyuan.Multidisciplinary collaborative design optimization modeling method of complex product[J].Journal of System Simulation,2010,22(11):2524-2527.
[9]王宗彦,虞国军,吴淑芳,等.面向并行工程的机械产品参数化协同设计[J].中南大学学报(自然科学版),2013,44(2):552-557.
Wang Zongyan,Yu Guojun,Wu Shufang.Parametric collaborative design of mechanical products for concurrent engineering[J].Journal of Central South University(Science and Technology),2013,44(2):552-557.
[10]李飞,章乐平,王志勇,等.航天器数字化协同设计技术研究[J].导弹与航天运载技术,2013(1):71-74.
Li Fei,Zhang Yueping,Wang Zhiyong,et al.Study on digital collaborative design technology for spacecraft[J].Missiles and Space Vehicles,2013(1):71-74.
[11]李健.基于网络的协同设计方法研究[J].清华大学学报(自然科学版),2000,40(9):90-96.
Li Jian.Collaborative design method on network[J].Journal of Tsinghua University(Science and Technology),2000,40(9):90-96.

相似文献/References:

[1]单永海,田鸿源,廖振强,等.轻武器射击精度及其表征方法研究[J].南京理工大学学报(自然科学版),2013,37(01):112.
 Shan Yonghai,Tian Hongyuan,Liao Zhenqiang,et al.Small arms’ firing precision and its characterization method[J].Journal of Nanjing University of Science and Technology,2013,37(02):112.
[2]孔建寿,张友良,汪惠芬,等.基于Web的同步协同设计实现技术[J].南京理工大学学报(自然科学版),2002,(03):251.
 KongJianshou ZhangYouliang WangHuifen QianLing.An Implementing Technology for Web-based Synchronization CSCD System[J].Journal of Nanjing University of Science and Technology,2002,(02):251.
[3]谢蓉华,樊卫华,王 冲,等.不确定网络控制系统的死区调度与控制协同 设计方法[J].南京理工大学学报(自然科学版),2016,40(06):643.[doi:10.14177/j.cnki.32-1397n.2016.40.06.002]
 Xie Ronghua,Fan Weihua,Wang Chong,et al.Dead band scheduling and control co-design method for uncertain networked control systems[J].Journal of Nanjing University of Science and Technology,2016,40(02):643.[doi:10.14177/j.cnki.32-1397n.2016.40.06.002]

备注/Memo

备注/Memo:
收稿日期:2015-05-07 修回日期:2015-11-23
基金项目:国防基础科研项目
作者简介:魏志芳(1974-),女,博士,副教授,主要研究方向:火炮自动武器与弹药工程,E-mail:lilac1974@139.com。
引文格式:魏志芳,王芳,李晓光,等.枪、弹等多领域协同设计系统构建[J].南京理工大学学报,2016,40(2):156-164.
投稿网址:http://zrxuebao.njust.edu.cn
更新日期/Last Update: 2016-04-30