[1]李京泽,王金刚.双列螺旋槽机械密封效果对比研究[J].南京理工大学学报(自然科学版),2016,40(03):343.[doi:10.14177/j.cnki.32-1397n.2016.40.03.016]
　Li Jingze,Wang Jin'gang.Contrast research of mechanical seal of double spiral groove[J].Journal of Nanjing University of Science and Technology,2016,40(03):343.[doi:10.14177/j.cnki.32-1397n.2016.40.03.016]
点击复制

双列螺旋槽机械密封效果对比研究
分享到：

《南京理工大学学报》（自然科学版）[ISSN:1005-9830/CN:32-1397/N]

卷:
40卷
期数:
2016年03期
页码:
343
栏目:
出版日期:
2016-06-30

文章信息/Info

Title:
Contrast research of mechanical seal of double spiral groove
文章编号:
1005-9830(2016)03-0343-05
作者:
李京泽1; 王金刚2
1.西京学院 机械工程学院,陕西 西安 710123; 2.西安石油大学 机械工程学院,陕西 西安 710065
Author(s):
Li Jingze1; Wang Jin'gang2
1.Mechanical Engineering College,Xijing University,Xi'an 710123,China; 2.School of Mechanical Engineering,Xi'an Shiyou University,Xi'an 710065,China
关键词:
双列螺旋槽;  机械密封;  液膜;  流场;  计算流体力学;  普通接触式密封;  压力分布;  泄漏量;  转速
Keywords:
double spiral grooves;  mechanical seals;  liquid films;  flow fields;  computational fluid dynamics;  normal contact seals;  pressure distribution;  leakages;  speeds
分类号:
TB42
DOI:
10.14177/j.cnki.32-1397n.2016.40.03.016
摘要:
为了在实际生产中提高双列同向螺旋槽密封效果,分析了其机械密封端面的液膜流场分布。基于计算流体力学(CFD)软件对所建立的双列同向螺旋槽机械密封端面和普通接触式机械密封端面结构的三维模型进行了数值模拟分析。针对各种工况模拟液膜在动环端面上的流场状态,计算模型的泄漏量。利用实验设备测量实际工作中液膜的压力分布与泄漏量。将普通接触式机械密封端面实验数据与其模拟结果进行对比,两者之间存在误差的主要原因是实验过程中设备的振动。模拟结果显示在0.1～0.5 MPa范围内相同转速的工况下,双列同向螺旋槽结构的密封效果约
Abstract:
To improve the seal property of corotating double spiral grooves in practical operation,the flow field of the liquid film of the mechanical seal is analyzed.The three-dimensional models of the mechanical seals of a corotating double spiral groove and a normal contact are numerically simulated using a computational fluid dynamics(CFD)software.The flow field states of the liquid film on the rotating seal ring are simulated for various working conditions,and the leakage is calculated.The pressure distribution and leakage of the liquid film are measured using professional equipments.The simulation data of a normal contact seal is compared with its experimental data,and the main reason for the error is the vibration of the equipment during the experiment.The simulation results prove that the seal ability of the corotating double spiral groove is approximately two times as the normal contact seal with a same speed and within the limit of 0.1-0.5 MPa.

参考文献/References:

[1] 廖传军,黄伟峰,索双富,等.流体静压型机械密封的半解析式流固耦合模型[J].机械工程学报,2010,46(20):145-151.
Liao Chuanjun,Huang Weifeng,Suo Shuangfu,et al.Semi-analytical fluid-solid coupling model for hydrostatic mechanical seals[J].Journal of Mechanical Engineering,2010,46(20):145-151.
[2]陈,王昌明,柳光辽.不同密封材料在高压动密封中的研究[J].南京理工大学学报,2000,24(2):105-108.
Chen Jie,Wang Changming,Liu Guangliao.Research on different sealing materials in high pressure dynamic sealing[J].Journal of Nanjing University of Science and Technology,2000,24(2):105-108.
[3]顾永泉.机械密封实用技术[M].北京:机械工业出版社,2001.
[4]魏龙.机械密封CAT装置及GY70机械密封性能的研究[D].南京:南京工业大学机械与动力工程学院,2003.
[5]Lebeck A O.Principles and design of mechanical face seals[M].New York,USA:John Wiley & Sons Inc,2001.
[6]Ruddy A V,Summers-Smith D.The mechanism of film generation in mechanical face seals[J].Tribology International,1982,15(4):227-231.
[7]王衍,孙见君,马晨波.双向旋转式非接触机械密封技术研究进展[J].流体机械,2013,43(3):34-40.
Wang Yan,Sun Jianjun,Ma Chenbo.Research progress in the bi-direction non-contact mechanical seal technology[J].Fluid Machinery,2013,43(3):34-40.
[8]彭建,鄢新华,左孝桐,等.上游泵送密封研究[J].流体机械,1998,26(2):3-8.
Peng Jian,Yan Xinhua,Zuo Xiaotong,et al.Research in upstream pumping mechanical seals[J].Fluid Machinery,1998,26(2):3-8.
[9]Etsion I,Kligerman Y,Halperin G.Analytical and experimental investigation of laser-textured mechanical sea1 faces[J].Tribology Transactions,1999,42(3):511-516.
[10]Buck G S,Volden D.Upstream pumping:A new concept in mechanical sealing technology[J].Lubrication Engineering,1990,46(4):213-217.
[11]刘忠,刘莹,刘向锋.双螺旋槽端面密封结构参数的优化设计[J].中国科技,2007,37(7):898-903.
Liu Zhong,Liu Ying,Liu Xiangfeng.The design of structural parameter optimization of double spiral groove[J].Science in China,2007,37(7):898-903.
[12]顾永泉,马永波.机械密封端面流体膜厚的测量技术[J].流体工程,1985(4):16-19.
Gu Yongquan,Ma Yongbo.The measurement technology of the fluid thickness in mechanical seal[J].Fluid Engineering,1985(4):16-19.

备注/Memo

备注/Memo:
收稿日期:2015-11-30 修回日期:2016-01-24
基金项目:西京学院科研基金(XJ150109)
作者简介:李京泽(1987-),硕士生,主要研究方向:流体机械的密封、损伤技术与监控技术,E-mail:ljz0624@126.com。
引文格式:李京泽,王金刚.双列螺旋槽机械密封效果对比研究[J].南京理工大学学报,2016,40(3):343-347.
投稿网址:http://zrxuebao.njust.edu.cn
更新日期/Last Update: 2016-06-30