[1]谢新宇,葛建立,孙全兆,等.冲击载荷下Ti/CFRP层合板结构的数值模拟分析[J].南京理工大学学报(自然科学版),2020,44(04):385-391.[doi:10.14177/j.cnki.32-1397n.2020.44.04.001]
 Xie Xinyu,Ge Jianli,Sun Quanzhao,et al.Numerical simulation analysis of Ti/CFRP laminatestructure under impact load[J].Journal of Nanjing University of Science and Technology,2020,44(04):385-391.[doi:10.14177/j.cnki.32-1397n.2020.44.04.001]
点击复制

冲击载荷下Ti/CFRP层合板结构的数值模拟分析()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
44卷
期数:
2020年04期
页码:
385-391
栏目:
出版日期:
2020-08-30

文章信息/Info

Title:
Numerical simulation analysis of Ti/CFRP laminatestructure under impact load
文章编号:
1005-9830(2020)04-0385-07
作者:
谢新宇葛建立孙全兆杨国来
南京理工大学 机械工程学院,江苏 南京 210094
Author(s):
Xie XinyuGe JianliSun QuanzhaoYang Guolai
School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China
关键词:
钛合金板 合板结构 碳纤维增强复合材料 冲击动力学 冲击损伤失效 复合材料铺层角度
Keywords:
titanium alloy plates laminate structure carbon fiber reinforced composite materials impact dynamics impact damage/failure composite layer angles
分类号:
TB332
DOI:
10.14177/j.cnki.32-1397n.2020.44.04.001
摘要:
为了研究钛合金/碳纤维增强复合材料(Ti/CFRP)层合板结构的抗冲击性能,采用基于三维Hashin准则的VUMAT材料子程序模拟复合材料层合板的损伤失效,采用内聚力单元模拟层合板与钛合金之间的胶层,采用Johnson-Cook本构模型模拟钛合金的塑性变形及失效,建立了Ti/CFRP层合板结构的冲击损伤有限元模型。分别讨论了冲击动能、钛板的厚度及复合材料的铺层角度等因素对层合板结构的抗冲击性能的影响,结果显示增加钛板的厚度可以有效提高层合板结构的抗冲击性能,Ti/CFRP层合板结构承受冲击载荷发生损伤失效时,失效模式以基体失效与拉伸分层失效为主,合理选择铺层角度可以改善复合材料层合板的抗冲击性能。分析结果可为Ti/CFRP层合板结构的设计及工程应用提供参考。
Abstract:
In order to study the impact resistance of titanium alloy/carbon fiber reinforced plastic(Ti/CFRP)laminate structure,the VUMAT material subroutine based on the three-dimensional Hashin criterion is used to simulate the damage and failure of composite laminates,and the cohesive unit is used to simulate the glue layer between CFRP and titanium alloy. The plastic deformation and failure of titanium alloy are simulated by a Johnson-Cook constitutive model. The impact damage finite element model of Ti/CFRP laminate structure is established. The effects of the impact kinetic energy,the thickness of the titanium plate and the layup angle of the composite on the impact resistance of the laminate structure are discussed. The results show that the increase of the thickness of the titanium plate can effectively improve the impact resistance of the laminate structure. When the Ti/CFRP laminate structure is damaged due to the impact load,the failure modes are mainly matrix failure and tensile delamination failure. A reasonable choice of layer angle can improve the impact resistance of the composite laminate. The analysis results can provide reference for the design and engineering application of the Ti/CFRP laminate structure.

参考文献/References:

[1] 罗益锋. 处于战略机遇期的全球碳纤维及其复合材料产业[J]. 高科技纤维与应用,2019,44(2):1-20.
Luo Yifeng. In the period of strategic opportunities of global carbon fibers and their composite materials industries[J]. Hi-Tech Fiber and Application,2019,44(2):1-20.
[2]崔旭,李斌,王朔,等. GLARE层板低速冲击的实验与模拟[J]. 航空材料学报,2019,39(2):68-74.
Cui Xu,Li Bin,Wang Shuo,et al. Simulation on low velocity impact to GLARE laminate based on ABAQUS[J]. Journal of Aeronautical Materials,2019,39(2):68-74.
[3]Ansari M M,Chakrabarti A. Influence of projectile nose shape and incidence angle on the ballistic perforation of laminated glass fiber composite plate[J]. Composites Science and Technology,2017,142:107-116.
[4]马玉娥,胡海威,熊晓枫. 低速冲击下纤维金属层合板的损伤模式研究[J]. 应用力学学报,2014,31(4):562-566.
Ma Yu’e,Hu Haiwei,Xiong Xiaofeng. Numerical simulation of underground oil tank explosion in gas station[J]. Chinese Journal of Applied Mechanics,2014,31(4):562-566.
[5]季玉辉. 基于Johnson-Cook模型的硬物损伤数值模拟研究[D]. 南京:南京航空航天大学,2009.
[6]石小红,陈海立,周光明,等. 基于渐进损伤模型的双搭接对接接头弯曲性能[J]. 南京理工大学学报,2014,38(4):464-469.
Shi Xiaohong,Chen Haili,Zhou Guangming,et al. Bending of bilateral butt joints using progressive damage model[J]. Journal of Nanjing University of Science and Technology,2014,38(4):464-469.
[7]陈建桥. 复合材料力学[M]. 武汉:华中科技大学出版社,2016.
[8]刘让奇. 碳纤维复合材料动态压缩力学性能研究[D]. 长沙:湖南大学,2016.
[9]Tan S C,Perez J. Progressive failure of laminated composites with a hole under compressive loading[J]. Reinf Plas Compos,1993,12:1043-1057.

备注/Memo

备注/Memo:
收稿日期:2019-12-21 修回日期:2020-06-06
基金项目:国家自然科学基金(51705253; 11572158); 十三五预研重点项目(30107040705)
作者简介:谢新宇(1995-),男,硕士生,主要研究方向:复合材料结构设计及优化,E-mail:1573979703@qq.com; 通讯作者:葛建立(1980-),男,副教授,主要研究方向:非线性动力学,虚拟样机技术,E-mail:gejianli@njust.edu.cn。
引文格式:谢新宇,葛建立,孙全兆,等. 冲击载荷下Ti/CFRP层合板结构的数值模拟分析[J]. 南京理工大学学报,2020,44(4):385-391.
投稿网址:http://zrxuebao.njust.edu.cn
更新日期/Last Update: 2020-08-30