[1]翁春生,袁亚雄,金志明.一种复杂装药结构的两相流内弹道模型及计算[J].南京理工大学学报(自然科学版),1995,(04):297-301.
 Weng Chunsheng,Yuan Yaxiong,Jin Zhiming.Two-phase Flow Interior Ballistic Model and Its Calculation for a Complex Charge Construction[J].Journal of Nanjing University of Science and Technology,1995,(04):297-301.
点击复制

一种复杂装药结构的两相流内弹道模型及计算
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
1995年04期
页码:
297-301
栏目:
出版日期:
1995-08-30

文章信息/Info

Title:
Two-phase Flow Interior Ballistic Model and Its Calculation for a Complex Charge Construction
作者:
翁春生袁亚雄金志明
南京理工大学动力工程学院
Author(s):
Weng Chunsheng;Yuan Yaxiong;Jin Zhiming
School of Dynamic Engineering,NUST,Nanjing 210094
关键词:
内弹道学 两相流 数值模拟 火炮
分类号:
TJ012.1
摘要:
根据带有复杂点传火系统的混合装药结构的工作特点,建立了两种主装药与可燃药筒的两相流内弹道数理模型以及点火管、低爆速点火管与点火药包等源项的燃气释放规律关系式。通过数值模拟,给出内弹道循环过程的详细结果。计算结果与试验结果的一致性较好。研究结果对于进一步分析异常压力机理有着重要的理论指导意义。

相似文献/References:

[1]刘宁,张相炎.再生式液体发射药火炮燃烧室内两相流模型[J].南京理工大学学报(自然科学版),2010,(03):347.
 LIU Ning,ZHANG Xiang-yan.Two-phase Flow Model in Combustion Chamber of Regenerative Liquid Propellant Gun[J].Journal of Nanjing University of Science and Technology,2010,(04):347.
[2]贾云飞,张涛,孔德仁,等.涡街流量计在含气液体测量中的试验研究[J].南京理工大学学报(自然科学版),2010,(01):103.
 JIA Yun-fei,ZHANG Tao,KONG De-ren.Experiment of Vortex Flowmeter Used in Gas-liquid Measurement[J].Journal of Nanjing University of Science and Technology,2010,(04):103.
[3]陈杨,廖振强,王涛,等.自动武器喷管气流反推减后坐技术[J].南京理工大学学报(自然科学版),2008,(06):676.
 CHEN Yang,LIAO Zhen-qiang,WANG Tao,et al.Technology of Reducing Recoil Force by Reverse Jet Gas for Autoweapons[J].Journal of Nanjing University of Science and Technology,2008,(04):676.
[4]张会生,苏明,张小兵,等.基于两相流动理论的点传火优化仿真[J].南京理工大学学报(自然科学版),2001,(02):194.
 ZhangHuisheng SuMing ZhangXiaobing YuanYaxiong.Optimization Simulation of Ignition and Flame Spreading Based on Two-phase Flow Theorem[J].Journal of Nanjing University of Science and Technology,2001,(04):194.
[5]戴荣,栗保明.固体工质电热化学炮膛内两相流模型与计算[J].南京理工大学学报(自然科学版),2000,(04):318.
 DaiRong LiBaoming.Two-phase Flow Model and Simulation of Solid Propellant Electrothermal Chemical Gun[J].Journal of Nanjing University of Science and Technology,2000,(04):318.
[6]陶其恒.涉及身管传热的膛内流动及其计算[J].南京理工大学学报(自然科学版),1997,(01):25.
 TaoQiheng.Flow in Gun Tube Involving Heat Transfer and Its Calculation[J].Journal of Nanjing University of Science and Technology,1997,(04):25.
[7]易文俊,汤瑞峰,邱佩蓉.钝感发射药的内弹道特性研究[J].南京理工大学学报(自然科学版),1997,(02):41.
 YiWengjun TangReifeng QuiPeirong.A Study on Interior Ballistic Characteristics of Passivation Propellant[J].Journal of Nanjing University of Science and Technology,1997,(04):41.
[8]李锋,张青蕃,张振铎,等.随行装药火炮膛内流动参数特性研究[J].南京理工大学学报(自然科学版),1995,(04):307.
 Li Feng,ZhangQinfang.Study of Travelling Charge Flow Parameter Capability in Gun Barrel[J].Journal of Nanjing University of Science and Technology,1995,(04):307.
[9]周彦煌,刘千里,王升晨.两相流内弹道应用软件系统的改进扩充和应用[J].南京理工大学学报(自然科学版),1994,(06):47.
 Zhou Yanhuang.The Modification and Expansion and Application of Two phase Flow Interior Ballistic Application Soft System.[J].Journal of Nanjing University of Science and Technology,1994,(04):47.
[10]金志明.火炮膛内压力波产生机理及其特征分析[J].南京理工大学学报(自然科学版),1992,(01):26.
[11]陆中兵,周彦煌,王育维.短管炮模块装药两相流内弹道模拟[J].南京理工大学学报(自然科学版),1999,(02):13.
 Lu Zhongbing Zhou Yanhuang Wang Yuewei.Two Phase Flow Interior Ballistic Simulation of the Short barrel Gun with Modular Charges[J].Journal of Nanjing University of Science and Technology,1999,(04):13.
[12]周彦煌,翁春生,袁亚雄.软点火理论在高装填密度装药火炮上的应用[J].南京理工大学学报(自然科学版),1995,(04):289.
 Zhou Yanhuang,Weng Chunsheng,Yuan Yaxiong.Application of Softignition Theory to High Dense Explosive Charge in Guns[J].Journal of Nanjing University of Science and Technology,1995,(04):289.
[13]周彦煌,魏建国.某加农炮膛炸事故原因的探讨[J].南京理工大学学报(自然科学版),1992,(02):7.

备注/Memo

备注/Memo:
国家自然科学基金
更新日期/Last Update: 2013-04-22