[1]杨江子,商庆清,潘江静.汽车效果图的一种简捷画法[J].南京理工大学学报(自然科学版),1996,(04):57-60.
 YangJiangzi ShangQingqing PanJiangjing.A Simple Pictorial Drawing of A Car[J].Journal of Nanjing University of Science and Technology,1996,(04):57-60.
点击复制

汽车效果图的一种简捷画法()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
1996年04期
页码:
57-60
栏目:
出版日期:
1996-08-30

文章信息/Info

Title:
A Simple Pictorial Drawing of A Car
作者:
杨江子商庆清潘江静
南京林业大学机械工程学院, 南京210037
Author(s):
YangJiangzi ShangQingqing PanJiangjing
School of Mechanical Engineering, Nanjing Forestry University, Nanjing 210037
关键词:
汽车 画法几何 射影几何 透视 比例尺
Keywords:
automobiles descriptive geomet ry project ive geomet ry perspect iv e scales
分类号:
TH126.2
摘要:
该文提供了一种简捷的绘制汽车效果图的方法。根据汽车这一特定对象和它的特殊条件,除给出常见的点列A(x,0)、B(0,y)的透视比例尺外,还给出了点列C(x,y)的透视比例尺。文中利用射影几何中射线比的特殊性质,解决了透视灭点在图板外的透视图画法。根据汽车的常见尺寸数据,绘出汽车的框架图。如作进一步着色和加阴影,即可获得较为满意的汽车效果图
Abstract:
A simple pictorial draw ing of a car is presented in this paper. Accor ding to the specific object and special condit io ns o f a car, the perspect ive scale o f the sequence of po int C( x , y ) is g iv en besides the perspect ive scale of the no rmal sequence of points A ( x , 0) and B ( 0, y ) . According to the nature of pro jective scale, it has solved the problem of dr aw ing a car ps perspective w hen perspective vanishing po int is o ut of the draf t ing board. In the end of this paper , a diag ram of a car is draw n in it s normal size. A pleased picto rial dr aw ing of a car w ill be o btained w hen color ed and shaded.

参考文献/References:

1 小高司郎. 透视投影的基本方程. 加拿大国际画法几何会议论文集, 神户: 日本神户大学,1978
2 张士良, 徐朔. 简捷透视图仪及其设计原理. 中国工程图学学会论文集, 上海: 同济大学, 1988
3 刘兴辰. 关于两用绘图机的研究. 机械设计, 1992( 4) : 41~43

相似文献/References:

[1]林棻,赵又群.汽车侧偏角估计方法比较[J].南京理工大学学报(自然科学版),2009,(01):122.
 LIN Fen,ZHAO You-qun.Comparison of Methods for Estimating Vehicle Side Slip Angle[J].Journal of Nanjing University of Science and Technology,2009,(04):122.
[2]王良模,彭育辉①,曾小平.浮钳盘式制动器的有限元分析[J].南京理工大学学报(自然科学版),2003,(06):756.
 Wang Liangmo Peng Yuhui Zeng Xiaoping.Finite Element Analysis on Key Parts of Float Disk Brake[J].Journal of Nanjing University of Science and Technology,2003,(04):756.
[3]王良模,曾小平,于鹏晓.汽车液压制动系统设计与分析软件的开发[J].南京理工大学学报(自然科学版),2001,(03):247.
 WangLiangmo ZengXiaoping YuPengxiao.The Development of the Software of Designing and Analyzing Vehicle Brake System[J].Journal of Nanjing University of Science and Technology,2001,(04):247.
[4]丁玉庆.汽车振动系统的简化及数学模型的建立[J].南京理工大学学报(自然科学版),2001,(04):391.
 DingYuqing.On Setting up Simplified and Mathematical Model of Truck Vibration System[J].Journal of Nanjing University of Science and Technology,2001,(04):391.
[5]王良模,孙刚,于鹏晓,等.鼓式制动器效能因数的计算研究[J].南京理工大学学报(自然科学版),1999,(03):32.
 WangLiangmo SunGang YuPengxiao LuQiang PengYuhui.A Study on the Calculation of Drum Brakes Efficiency Factor[J].Journal of Nanjing University of Science and Technology,1999,(04):32.
[6]张河,翟性泉,李豪杰.汽车安全气囊磁电式传感器的设计与研究[J].南京理工大学学报(自然科学版),1999,(04):324.
 ZhangHe ZhaiXingquan LiHaojie.Design and Research of Magnetic electric Sensor for Safety Airbag of Automobile[J].Journal of Nanjing University of Science and Technology,1999,(04):324.
[7]刘振吉,邓德贵,朱晓,等.判定汽车失效分布的统一线性检验法[J].南京理工大学学报(自然科学版),1999,(05):438.
 LiuZhenji DengDegui ZhuXiao MaYumin.The Consolidated Linearity Testing Method to Determine Automobile Failure Distributions[J].Journal of Nanjing University of Science and Technology,1999,(04):438.
[8]王良模,王和福,陈锦荣,等.IVECO 汽车驱动桥试验台的研制[J].南京理工大学学报(自然科学版),1997,(02):97.
 Wang Liangmo Wang Hefu Chen Jinrong Lin Zhilian Cao Yuhua.The Developmet of the IVECO Automobile Driving Shaft’s Test[J].Journal of Nanjing University of Science and Technology,1997,(04):97.
[9]马玉民,蔡经涵.汽车产品可靠性评估方法[J].南京理工大学学报(自然科学版),1994,(05):71.
 Ma Yumin.The Evaluation Method for Reliability of Automobile Products.[J].Journal of Nanjing University of Science and Technology,1994,(04):71.
[10]刘荣先,吴华杰,秦永法,等.基于FEM的汽车加速踏板臂断口槽优化设计[J].南京理工大学学报(自然科学版),2013,37(06):946.
 Liu Rongxian,Wu Huajie,Qin Yongfa,et al.Optimization design of fracture groove for automobile accelerator pedal arm based on FEM[J].Journal of Nanjing University of Science and Technology,2013,37(04):946.

备注/Memo

备注/Memo:
杨江子 男 58岁 副教授
更新日期/Last Update: 2013-04-11