[1]方子良.复模态参数识别[J].南京理工大学学报(自然科学版),2000,(01):56-60.
　FangZiliang.Identification of Complex Modal Parameters[J].Journal of Nanjing University of Science and Technology,2000,(01):56-60.
点击复制

复模态参数识别()
分享到：

《南京理工大学学报》（自然科学版）[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2000年01期
页码:
56-60
栏目:
出版日期:
2000-02-28

文章信息/Info

Title:
Identification of Complex Modal Parameters
作者:
方子良
南京理工大学制造工程学院, 南京210094
Author(s):
FangZiliang
School of Manufacturing Engineering,NUST,Nanjing 210094
关键词:
机床;  振动;  阻尼;  复模态分析
Keywords:
machine tools;  vibrat ion;  damping;  complex modal analysis
分类号:
TG502.3
摘要:
在以往的机床动态性能研究中 ,一般是采用实模态分析方法来分析研究机床的动态特性 ,然而 ,机床结构中存在的阻尼既有材料的内阻尼 ,又有各结合面之间的接触阻尼 ,作用机理很复杂 ,因而 ,用传统的实模态分析法就无法使系统的运动方程解耦。该文应用复模态原理 ,对M7130平面磨床的导轨部件进行了测试 ,结合理论分析 ,对前二阶进行了复模态参数识别 ,并作出了相应的复振型图
Abstract:
In the past study of dynamic proport ies of a machine tool, the method of real modal analysis was used g enerally under supposing proport ional damping. In fact , however, there are material internal damping as well as touching damping betw een the component surfaces in a machine tool st ructure. T he mechanism of their act ion is very complex . So it is impossible to decouple equations of the system mot ion by means of the old method of real modal ana-l ysis. In this paper, by use of the complex modal principle, the way of M7130 surface grinder has been tested. It was combined w ith theoret ical analysis, the complex modal parameters of the first and second order w ere ident if ied and their associated diagrams of the complex mode shapes w ere also done.

参考文献/References:

1 扬木肃, 唐恒龄, 廖伯瑜. 机床动力学( Ò ). 北京: 机械工业出版社, 1983
2 Sedek M M. 机床动力学. 华中工学院机械工程研究所译. 武汉: 华中工学院, 1980
3 Tobis S A. 机床振动学. 北京: 机械工业出版社, 1965

相似文献/References:

[1]余春华,成晓杰,尹晓春.横向有限应变对张力腿平台空间涡激振动响应的影响[J].南京理工大学学报(自然科学版),2009,(06):723.
　YU Chun-hua,CHENG Xiao-jie,YIN Xiao-chun.Influence of Transverse Finite Strains on Spatial Vortex Induced Vibration of Tension Leg Platform[J].Journal of Nanjing University of Science and Technology,2009,(01):723.
[2]陶钢,钟宁钒,朱鹤荣.某火箭弹引信擦地炸机构微弹簧的动力学分析[J].南京理工大学学报(自然科学版),2005,(04):403.
　TAO Gang,ZHONG Ning-fan,ZHU He-rong.Dynamic Analysis of Mini-spring Vibration in Brushing Exploding Mechanism of the Fuse in Grenade[J].Journal of Nanjing University of Science and Technology,2005,(01):403.
[3]张龙,张友良,王筱莉.基于Stewart机床的一种新结构[J].南京理工大学学报(自然科学版),2003,(01):60.
　ZhangLong ZhangYouliang WangXiaoli.A New Architecture of Stewart Based Machine Tools[J].Journal of Nanjing University of Science and Technology,2003,(01):60.
[4]邹华,尹晓春.端部受冲击细杆变形的瞬态波函数解[J].南京理工大学学报(自然科学版),2003,(06):733.
　Zou Hua Yin Xiaochun.Formulas of Transient Wave Propagation along Thin Rod[J].Journal of Nanjing University of Science and Technology,2003,(01):733.
[5]陈吉清,兰凤崇.Stewart并联机床瞬时刚度分析与应用[J].南京理工大学学报(自然科学版),2007,(04):482.
　CHEN Ji-qing,LAN Feng-chong.Instantaneous Stiffness Analysis and Application in Stewart Parallel Machine Tools[J].Journal of Nanjing University of Science and Technology,2007,(01):482.
[6]余海,郭治,钱林方①.基于Matlab和I-Deas的振动主动控制仿真系统开发[J].南京理工大学学报(自然科学版),2002,(01):6.
　YuHai GuoZi QianLinfang.Development of Simulation System Based on Matlab and I-Deas for Active Control of Structure Vibration[J].Journal of Nanjing University of Science and Technology,2002,(01):6.
[7]丁玉庆.汽车振动系统的简化及数学模型的建立[J].南京理工大学学报(自然科学版),2001,(04):391.
　DingYuqing.On Setting up Simplified and Mathematical Model of Truck Vibration System[J].Journal of Nanjing University of Science and Technology,2001,(01):391.
[8]周叮,谢玉树.弹性枪架的等效质量[J].南京理工大学学报(自然科学版),2000,(03):253.
　ZhouDing XieYushu.The Equivalent Mass of Elastic Tripod Mount of Machine Gun[J].Journal of Nanjing University of Science and Technology,2000,(01):253.
[9]方子良.机床工艺系统综合效应的稳定性分析[J].南京理工大学学报(自然科学版),1999,(04):316.
　FangZiliang.Stability Analysis of the Synthetical Effects in Mechanical Technology System[J].Journal of Nanjing University of Science and Technology,1999,(01):316.
[10]欧阳光耀,王树宗,王德石.火炮身管振动吸振的原理与实验研究[J].南京理工大学学报(自然科学版),1999,(05):409.
　OuyangGuangyao WangShuzong WangDeshi.Investigation about Vibration Absorbing of Barrel[J].Journal of Nanjing University of Science and Technology,1999,(01):409.
[11]方子良,王军辉,高骏.动力减振器最佳参数的确定方法[J].南京理工大学学报(自然科学版),2002,(03):334.
　FangZiliang WangJunhui GaoJun.A Definite Method of Optimum Parameters of Dynamic Damper[J].Journal of Nanjing University of Science and Technology,2002,(01):334.

备注/Memo

备注/Memo:
方子良 男 56 岁 副教授
更新日期/Last Update: 2013-03-25