[1]黄磊,赫雷,周克栋,等.装填条件的变化对金属风暴武器系统内弹道性能的影响[J].南京理工大学学报(自然科学版),2004,(04):360-363.
 HUANG Lei,HE Lei,ZHOU Ke dong,et al.The Effect of Load Conditions on the Interior Ballistic Characteristics of the Metal Storm Weapon System[J].Journal of Nanjing University of Science and Technology,2004,(04):360-363.
点击复制

装填条件的变化对金属风暴武器系统内弹道性能的影响()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2004年04期
页码:
360-363
栏目:
出版日期:
2004-08-30

文章信息/Info

Title:
The Effect of Load Conditions on the Interior Ballistic Characteristics of the Metal Storm Weapon System
作者:
黄磊赫雷周克栋王永娟
南京理工大学机械工程学院, 江苏南京210094
Author(s):
HUANG LeiHE LeiZHOU Ke dongWANG Yong juan
School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
金属风暴 内弹道 装填条件 最大膛压 初速
Keywords:
metal storm interior ballist ics load condit ions max imum pressure muzzle velocity
分类号:
TJ012.1
摘要:
该文针对金属风暴武器的特点 ,以发射某枪弹为例 ,详细讨论了装药量、火药厚度、弹头质量、药室容积等装填条件的变化对金属风暴武器系统内弹道性能的影响规律。其规律为 :随着装药量的增大 ,火药厚度的减小 ,药室容积的减小将使最大膛压和子弹出枪口速度均相应地增加 ;弹头质量的增加将使最大膛压增加 ,子弹出枪口速度减小。这些规律为研究金属风暴武器系统的内弹道机制及控制机制打下了基础。
Abstract:
According to the characterist ics of the metal storm w eapon system, this paper takes a cart ridge as an ex ample to discuss the effect of such load conditions as pow der weig ht , the thickness of pow der g ranular, bullet mass and chamber volume on the interior ballist ics performances of the metal storm w eapon system. The results are as follow s: the maximum pressure and the muzzle velocity of bullet increase w hen the pow der w eight increases, the thickness of pow der granular decreases and the chamber volume decreases; w hen the bullet mass increases, the max imum pressure of propellant gas increases, but the muzzle velocity of bullet decreases. T hose regularit ies are of great importance for the study on the mechanism of interior ballist ics and the controll of the metal storm w eapon system.

参考文献/References:

[ 1] 华东工学院八〇 一研究室. 内弹道学[ Z] . 南京: 华东工学院, 1986.
[ 2] Metal Storm Technolog y. http: / / ww w. metalstorm. com/ 10 technolo gy/ technolog y. html. 2002- 6- 18.
[ 3] 赫雷. 串联预装填多体系统的结构原理及控制理论研究[ D] : 南京: 南京理工大学机械工程学院, 2002.
[ 4] 《步兵自动武器及弹药设计手册》编写组. 步兵自动武器及弹药设计手册: 上册. 北京: 国防工业出版社, 1977.

相似文献/References:

[1]王珊珊,王浩,阮文俊,等.单兵火箭平衡发射系统内弹道数值模拟[J].南京理工大学学报(自然科学版),2011,(03):343.
 WANG Shan-shan,WANG Hao,RUAN Wen-jun,et al.Numerical Simulation on Interior Ballistic of Individual Rocket Balance Launching System[J].Journal of Nanjing University of Science and Technology,2011,(04):343.
[2]刘志涛,徐滨,南风强,等.低温感包覆火药燃烧过程破孔规律研究[J].南京理工大学学报(自然科学版),2011,(05):709.
 LIU Zhi-tao,XU Bin,NAN Feng-qiang,et al.Coating Perforation Laws in Combustion Process of Low Temperature Sensitivity Coated Propellant[J].Journal of Nanjing University of Science and Technology,2011,(04):709.
[3]郁伟,朱斌,张小兵,等.耦合内弹道过程的膛口流场数值模拟与分析[J].南京理工大学学报(自然科学版),2009,(03):335.
 YU Wei,ZHU Bin,ZHANG Xiao-bing.Numerical Simulation and Analysis of Muzzle Flow Field Coupling with Interior Ballistic Process[J].Journal of Nanjing University of Science and Technology,2009,(04):335.
[4]季新源,袁亚雄,王敬,等.超高射频火炮内弹道优化设计[J].南京理工大学学报(自然科学版),2008,(02):185.
 JI Xin-yuan,YUAN Ya-xiong,WANG Jing,et al.Interior Ballistic Optimalized Design of Hyper Firing-rate Gun[J].Journal of Nanjing University of Science and Technology,2008,(04):185.
[5]陈龙淼,钱林方.复合材料身管膛内气流与固壁传热分析[J].南京理工大学学报(自然科学版),2008,(03):327.
 CHEN Long-miao,QIAN Lin-fang.Heat Transfer Between Gas and Inner Surface of Composite Material Barrels[J].Journal of Nanjing University of Science and Technology,2008,(04):327.
[6]陈杨,廖振强,王涛,等.自动武器喷管气流反推减后坐技术[J].南京理工大学学报(自然科学版),2008,(06):676.
 CHEN Yang,LIAO Zhen-qiang,WANG Tao,et al.Technology of Reducing Recoil Force by Reverse Jet Gas for Autoweapons[J].Journal of Nanjing University of Science and Technology,2008,(04):676.
[7]陆欣,张浩,周彦煌,等.埋头弹内弹道过程数值分析[J].南京理工大学学报(自然科学版),2008,(06):690.
 LU Xin,ZHANG Hao,ZHOU Yan-huang,et al.Numerical Analysis on Interior Ballistics of Cased Telescoped Ammunition[J].Journal of Nanjing University of Science and Technology,2008,(04):690.
[8]张 帆,廖振强,王 涛,等.膨胀波枪炮发射原理数值建模与分析[J].南京理工大学学报(自然科学版),2007,(01):17.
 ZHANG Fan,LIAO Zhen-qiang,WANG Tao,et al.Numerical Modeling and Analysis on Rarefaction Wave Gun[J].Journal of Nanjing University of Science and Technology,2007,(04):17.
[9]王昌明*,陈,柳光辽,等.相关分析在水下枪械内弹道计算中的应用[J].南京理工大学学报(自然科学版),2005,(03):260.
 WANG Chang-ming,CHEN Jie,LIU Guang-Liao,et al.Application of Correlation Analysis Used in Interior Ballistics Calculation for Underwater Gun[J].Journal of Nanjing University of Science and Technology,2005,(04):260.
[10]赫雷,周克栋,王永娟.多发串联有控发射武器系统内弹道物理过程[J].南京理工大学学报(自然科学版),2004,(05):481.
 HE Lei,ZHOU Ke-dong,WANG Yong-juan.Physical Process of Interior Ballistics of Weapon System with Multiple Rounds in Series in Controllable Firing Way[J].Journal of Nanjing University of Science and Technology,2004,(04):481.
[11]倪志军y,周克栋,赫 雷,等.基于侧装药结构的金属风暴武器内弹道机理分析[J].南京理工大学学报(自然科学版),2005,(06):674.
 NI Zhi-jun~,ZHOU Ke-dong~,HE Lei~,et al.Analysis of Interior Ballistic Mechanism of Metal Storm Weapon with Side Chambers[J].Journal of Nanjing University of Science and Technology,2005,(04):674.

备注/Memo

备注/Memo:
作者简介: 黄磊( 1970- ) , 男, 四川成都人, 讲师, 硕士, 主要研究方向: 火炮、自动武器与弹药工程, Email:huanglei@ mail. njust. edu. cn。
更新日期/Last Update: 2013-03-11