[1]王宗荣,y,左敦稳,等.TC4钛合金高速铣削参数的模糊正交优化[J].南京理工大学学报(自然科学版),2005,(06):709-712.
 WANG Zong-rong~.Fuzzy Orthogonal Optimization for High-speed Milling Parameters of Milling TC4[J].Journal of Nanjing University of Science and Technology,2005,(06):709-712.
点击复制

TC4钛合金高速铣削参数的模糊正交优化
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2005年06期
页码:
709-712
栏目:
出版日期:
2005-12-30

文章信息/Info

Title:
Fuzzy Orthogonal Optimization for High-speed Milling Parameters of Milling TC4
作者:
王宗荣1 2y 左敦稳1 王 珉1
1.南京航空航天大学机电学院, 江苏南京210016; 2. 盐城工学院机械工程系, 江苏盐城224003
Author(s):
WANG Zong-rong~
1,2),ZUO Dun-wen~1,WANG Min~1
关键词:
钛合金 切削加工 高速铣削 参数优化 模糊正交
Keywords:
titanium alloy machining process high-speed milling parameters optimization fuzzy orthogonalization
分类号:
TG54
摘要:
为了充分考虑切削加工参数优化中的不确定性问题,该文提出了一种适用于TC4钛合金高速铣削参数优化的“非确定性的”模型,即模糊正交优化模型。该模型以切削力恒定和较高的金属去除率的模糊综合值作为目标函数,找出了最佳切削用量。实验和仿真表明:该模型得到的最佳切削用量与实验的分析结果和生产现场的经验分析结果一致性好。该模型实用性强、精度高、易于编程,对于指导实际生产、实现智能加工具有重要意义。
Abstract:
In order to consider the problems of uncertainness in the opt imizat ion of cutt ing parameters, this paper presents a " uncertain" model named fuzzy orthogonal optimization, which is applied to the opt imizat ion of cutting parameters for high-speed milling titanium alloy TC4. In this model, the fuzzy comprehensive evaluation of the fixed milling force and higher metal removing rates is used as the objective function so that the best cutt ing parameters are gotten. The experimental simulation shows that the best cutting parameters gotten from the model are in good consistency with the cutting parameters gotten from the experiments and in practical manufacturing. This model is practical, accurate and easy to guide programming and to realize intelligent machining.

参考文献/References:

[ 1] 陈日日翟. 金属切削原理[ M] . 北京: 机械工业出版社, 1992. 260- 267.
[ 2] 师汉民. 基因遗传算法用于切削用量优化[ J] . 机械工艺师, 1992( 9) : 3- 6.
[ 3] Ermer D S. A century of optimizing machining operation [ J] . ASME J of Manufacturing Science and Engineering, 1997, 119: 817- 822.
[ 4] 贺仲雄. 模糊数学及其应用[M] . 天津: 天津科学技术出版社, 1985. 35- 45.

相似文献/References:

[1]方子良,王栓虎.刀具工作角度的计算方法——解析法[J].南京理工大学学报(自然科学版),1998,(04):13.
 Fang Ziliang Wang Shuanhu.The Calculate Method of Cutter Working Angle[J].Journal of Nanjing University of Science and Technology,1998,(06):13.
[2]王宗荣,等.基于GA-NN的钛合金工件磨削表面烧伤裂纹图像的自动识别[J].南京理工大学学报(自然科学版),2006,(06):697.
 WANG Zong-rong,ZUO Dun-w en,et al.Automatic Identification for Ground Burning Crack of Titanium Alloy Parts Based on Genetic Algorithms and Neural Networks[J].Journal of Nanjing University of Science and Technology,2006,(06):697.

备注/Memo

备注/Memo:
作者简介: 王宗荣( 1963- ) , 男, 江苏东台人, 副教授, 博士生, 主要研究方向: 智能制造、计算机视觉等, E-mail: zrwang@126. com。
更新日期/Last Update: 2013-03-03