[1]高 峰,王雨时.引信隔爆试验内腔气体压力的工程计算[J].南京理工大学学报(自然科学版),2007,(05):546-549.
　GAO Feng,WANG Yu-shi.Engineering Evaluation of Gas Pressure of Cavity for Fuze Explosion Interruption Safety Test[J].Journal of Nanjing University of Science and Technology,2007,(05):546-549.
点击复制

引信隔爆试验内腔气体压力的工程计算
分享到：

《南京理工大学学报》（自然科学版）[ISSN:1005-9830/CN:32-1397/N]

卷:
期数:
2007年05期
页码:
546-549
栏目:
出版日期:
2007-10-30

文章信息/Info

Title:
Engineering Evaluation of Gas Pressure of Cavity for Fuze Explosion Interruption Safety Test
作者:
高 峰;  王雨时
南京理工大学机械工程学院, 江苏南京210094)
Author(s):
GAO Feng; WANG Yu-shi
School of Mechanical Engineering,NUST,Nanjing 210094,China
关键词:
引信;  隔爆;  安全性;  气体压力
Keywords:
fuzes;  explosion interruption;  safety;  gas pressure
分类号:
TJ430
摘要:
该文从真实气体状态方程出发,借鉴内弹道学中的密闭爆发器原理,在建立简化的引信雷管爆炸数学模型的基础上,得到了引信隔爆试验内腔气体压力的计算公式。针对雷管装药提出了炸药力的概念;考虑到雷管爆炸生成固体产物的影响,提出了生成气体质量系数的概念。通过分析计算,给出了引信雷管常用起爆药和猛炸药的炸药力,以及生成气体的质量系数,据此可进行引信雷管在隔爆位置爆炸时最大气体压力的工程计算。实例应用表明,该理论与实测结果符合较好,可用于解决引信隔爆强度的计算。该文研究可为引信隔爆安全性设计提供参考。
Abstract:
B ased on the rea l gas state equat ion, the princ ip le o f c losed bomb in interior ba llistics and the simplified mathemat icalmode l of the explod ing detonators at the exp losion interruption pos-i tion in fuze, the formula to ca lculate the pressure in the cavity of fuze is obtained. The def in itions of exp losive pow er for charges and gas product mass coeffic ien t in considera tion of the so lid product of exp losives in detonators are presen ted. By the ana lysis and calcu lation, the values of explosive power and gas productmass coefficient are brought out for explosives in common use in detonators. A ll these make it possib le to carry ou t the engineering evaluation of the exp loded gas pressure of detonators at the explosion in terrupted position. The applicat ion in the cases proves that the above theory consists w e ll w ith the facts. The theory can also be used to eva luate the explosion interrup tion strength for fuze. This paper prov ides reference to the design fo r fuze exp losion interrupt ion safety.

参考文献/References:

[ 1] 张宝坪, 张庆明, 黄风雷. 爆轰物理学[M ]. 北京: 兵器工业出版社, 2001.
[ 2] 华东工程学院103教研室. 内弹道学[M ]. 北京: 国防工业出版社, 1978.
[ 3] 高峰. 引信隔爆安全性分析与计算[ D] . 南京: 南京理工大学机械工程学院, 2005.
[ 4] 劳允亮. 起爆药化学与工艺学[M ] . 北京: 北京理工大学出版社, 1997.
[ 5] 杨国麟. 对小口径弹全保险型引信底部内螺纹强度设计准则的探讨[ J]. 兵工学报( 引信分册), 1981, 2( 1): 18- 25.

相似文献/References:

[1]李长生,张合,查冰婷,等.引信无线供能系统电磁耦合结构外围金属介质涡流损耗分析[J].南京理工大学学报(自然科学版),2011,(03):347.
　LI Chang-sheng,ZHANG He,ZHA Bing-ting.Eddy Current Loss Analysis of Exterior Metal Dielectric for Electromagnetic Coupling Structure in Fuze Wireless Power Supply System[J].Journal of Nanjing University of Science and Technology,2011,(05):347.
[2]陈会光,王雨时,闻泉,等.引信球转子运动的四元数数学模型数值仿真[J].南京理工大学学报(自然科学版),2011,(03):352.
　CHEN Hui-guang,WANG Yu-shi,WEN Quan.Numerical Simulation on Movement of Fuze Ball Rotor with Mathematical Model of Quaternion[J].Journal of Nanjing University of Science and Technology,2011,(05):352.
[3]闻泉,王雨时.引信球转子动力学特性模拟试验[J].南京理工大学学报(自然科学版),2009,(01):100.
　WEN Quan,WANG Yu-shi.Simulation Experiment on Dynamics Performance of Fuze Ball Rotors[J].Journal of Nanjing University of Science and Technology,2009,(05):100.
[4]刘波,陆静,王炅,等.磁流变液引信延期解除保险机构特性分析[J].南京理工大学学报(自然科学版),2009,(04):480.
　LIU Bo,LU Jing,WANG Jiong.Characteristic Analysis on MRF Delay Arming Device of Fuzes[J].Journal of Nanjing University of Science and Technology,2009,(05):480.
[5]黄学功,陈荷娟.基于地磁信号的冗余保险方法研究[J].南京理工大学学报(自然科学版),2009,(04):485.
　HUANG Xue-gong,CHEN He-juan.Redundant Safety Method Based on Geomagnetic Signal[J].Journal of Nanjing University of Science and Technology,2009,(05):485.
[6]梁医,张明宏,陈荷娟,等.引信曲折槽机构摩擦系数检测模型及其求解[J].南京理工大学学报(自然科学版),2005,(06):666.
　LIANG Yi,ZHANG Hong-ming,CHEN He-juan,et al.Model of Determining the Friction Factor in the Fuse Zigzag Slot Mechanism and Its Solution[J].Journal of Nanjing University of Science and Technology,2005,(05):666.
[7]陈思,赵惠昌.基于DSP的LFM脉冲引信信号模糊函数计算 及参数提取研究[J].南京理工大学学报(自然科学版),2013,37(01):70.
　Chen Si,Zhao Huichang.Calculation of LFM pulse fuze signal’s ambiguity function and its parameters extraction based on DSP[J].Journal of Nanjing University of Science and Technology,2013,37(05):70.
[8]黄晓毛,赖百坛,陈荷娟.基于CPLD的校频二进制编码解码方法[J].南京理工大学学报(自然科学版),2003,(01):36.
　HuangXiaomao LaiBaitan ChenHejuan.Decoding Method of Calibration Frequency Binary System Code Based on CPLD[J].Journal of Nanjing University of Science and Technology,2003,(05):36.
[9]周晓东,张河.引信体外射频电源技术研究[J].南京理工大学学报(自然科学版),2003,(02):148.
　ZhouXiaodong ZhangHe.Technology of Externally RF Power for Fuze[J].Journal of Nanjing University of Science and Technology,2003,(05):148.
[10]马少杰,张河,王雨时.引信软件可靠性设计技术研究[J].南京理工大学学报(自然科学版),2003,(04):439.
　MaShaojie ZhangHe WangYushi.Research on Reliability Design Techniques for Fuze Software[J].Journal of Nanjing University of Science and Technology,2003,(05):439.

备注/Memo

备注/Memo:
作者简介: 高峰( 1978- ), 男, 湖北麻城人, 硕士, 主要研究方向: 引信系统分析与设计, E-mail: gao f21725179@ yahoo. com. cn; 通讯作者: 王雨时( 1962- ) , 男, 辽宁本溪人, 教授, 主要研究方向: 引信系统分析与设计, E-mail: wysh@i 126. com。
更新日期/Last Update: 2007-10-30