[1]徐敏锐,曾 捷,穆小星,等.特高压电流互感器自动化检定系统设计与应用[J].南京理工大学学报(自然科学版),2017,41(06):730.[doi:10.14177/j.cnki.32-1397n.2017.41.06.011]
 Xu Minrui,Zeng Jie,Mu Xiaoxing,et al.Design and application of automatic verification system forultra-high voltage current transformer[J].Journal of Nanjing University of Science and Technology,2017,41(06):730.[doi:10.14177/j.cnki.32-1397n.2017.41.06.011]
点击复制

特高压电流互感器自动化检定系统设计与应用()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
41卷
期数:
2017年06期
页码:
730
栏目:
出版日期:
2017-12-31

文章信息/Info

Title:
Design and application of automatic verification system forultra-high voltage current transformer
文章编号:
1005-9830(2017)06-0730-08
作者:
徐敏锐12曾 捷3穆小星12李志新12陈 刚12
1.国网江苏省电力公司 电力科学研究院,江苏 南京 211103; 2.国家电网公司 电能计量重点实验室,江苏 南京210019; 3.南京航空航天大学 机械结构力学及控制国家重点实验室,江苏 南京 210016
Author(s):
Xu Minrui12Zeng Jie3Mu Xiaoxing12Li Zhixin12Chen Gang12
1.State Grid Jiangsu Electric Power Company Research Institute,Nanjing 211103,China; 2.State Grid Key Laboratory of Electric Energy Measurement,Nanjing 210019,China; 3.State Key Laboratory of Mechanics and Control of Mechanical Structures,Nanjing Univer
关键词:
特高压 电流互感器 自动化检定系统 气体绝缘组合电器 智能工频电源 大容量升流器 无功补偿装置
Keywords:
ultra-high voltage current transformers automatic verification systems gas-insulated switchgears intelligent power supplys large capacity current generators reactive power compensation devices
分类号:
TM452
DOI:
10.14177/j.cnki.32-1397n.2017.41.06.011
摘要:
为解决特高压电流互感器现场检定难题,研究特高压气体绝缘组合电器(GIS)电流互感器自动化检定系统。该系统主要包括智能工频电源、大容量升流器、无功补偿装置、标准电流互感器等关键部件。智能工频电源具有功率电子电源与电工电源串联输出、回路参数计算、无功补偿控制和误差检定等功能。采用一次绕组串并联的方法,设计了大容量升流器。采用原边和副边并联补偿电容器的方式,设计了多组合无功补偿装置。通过了省级计量测试机构测试和国家电网公司重点特高压工程电流互感器现场检定试验。结果表明,该检定系统能够实现特高压GIS电流互感器一次回路参数精确测量、升流器原副边混合无功补偿装置带电自动投切、误差自动检定,有效保证了7 200 A大电流检定点和15 A小电流检定点的精确快速定位,减小了对现场电源和升流器的容量需求。
Abstract:
An automatic verification system for ultra-high voltage(UHV)gas-insulated switchgear(GIS)current transformer is researched to solve the onsite verification problem of UHV current transformers.The system mainly consists of an intelligent power supply,a large capacity current generator,a reactive power compensation device and a standard current transformer.The intelligent power supply has the functions such as power electronic power supply and electrical power supply series output,circuit parameter calculation,reactive power compensation control and error verification.The large capacity current generator is designed by the method of series and parallel connection of the primary winding.The multi-combination reactive power compensation device is designed using the parallel compensation of the primary and secondary side.This system passes the system test of provincial measurement institution and onsite verification of State Grid key UHV project current transformer.The results show that,the verification system realizes accurate measurement of primary circuit parameters of UHV GIS current transformers,electriferous automatic switching of reactive power compensation device for current generators and automatic error verification,and that ensures the accurate and quick positioning of 7 200 A high current verification point and 15 A small current verification point,and reduces the capacity requirements of the onsite power supply and the current generator.

参考文献/References:

[1] JJG1021-2007,电力互感器[S].
[2]DL/T448-2016,电能计量装置技术管理规程[S].
[3]Lei Ertao,Yin Xianggen,Yu Chen,et al.A cascaded D-STATCOM integrated with a distribution transformer for medium-voltage reactive power compensation[J].Journal of Power Electronics,2017,17(2):522-532.
[4]吴良科,刘浩,岳长喜,等.GIS大电流互感器现场检定试验中的无功补偿[J].高电压技术,2010,36(6):1560-1565.
Wu Liangke,Liu Hao,Yue Changxi,et al.Reactive power compensation of on-site calibration test for current transformers[J].High Voltage Engineering,2010,36(6):1560-1565.
[5]Zhao Baishan,Li Wenhui.Research of comprehensive compensation of harmonics reactive current and DC bias in UHV power grid[J].International Journal of Hybrid Information Technology,2017,9(10):353-362.
[6]包玉树,胡永健,叶加星,等.基于电流互感器负荷误差外推法的校验技术研究[J].中国计量,2017,42(9):70-72.
Bao Yushu,Hu Yongjian,Ye Jiaxing,et al.Research on calibration technology of current transformer based on load error extrapolation[J].China Metrology,2017,42(9):70-72.
[7]Vandiver B.A revolution in current transformer testing[J].Powergrid International,2012,17(8):40-44.
[8]顾华,周珺,许震欢,等.GIS电流互感器现场校验新技术分析及应用探讨[J].机电信息,2014(36):98-100.
Gu Hua,Zhou Jun,Xu Zhenhuan,et al.Analysis and application of the new technology for GIS current transformer field calibration[J].Mechanical and Electrical Information,2014(36):98-100.
[9]Alkhazragi S,Alshamaa K.Cascaded H-bridge multilevel inverter using SPWM and MSPWM strategies[J].International Journal of Engineering Research and Applications,2017,7(6):14-20.
[10]张艳莉,费万民.基于重心重合原则的数字化多电平SPWM方法[J].南京理工大学学报,2010,34(3):299-302.
Zhang Yanli,Fei Wanmin.Digitalized multilevel SPWM method based on cg-superposition theorem[J].Journal of Nanjing University of Science and Technology,2010,34(3):299-302
[11]吴昊,苏卫民,顾红.基于非均匀快速傅氏变换的多站无源雷达成像算法[J].南京理工大学学报,2012,36(6):984-988.vWu Hao,Su Weimin,Gu Hong,et al.Passive multistatic radar imaging algorithm based on non-uniform fast Fourier transform method[J].Journal of Nanjing University of Science and Technology,2012,36(6):984-988.
[12]Wang Qi,Gao Tian.Research of SPWM algorithm based on equivalent area compensation[J].Advanced Materials Research,2012,562-564:2174-2177.
[13]万秋一,李士林,闫鑫,等.一种等面积法生成SPWM 波形的算法[J].核电子学与探测技术,2011,31(5):588-590.
Wan Qiuyi,Li Shilin,Yan Xin,et al.Realization based on sequential control the SPWM[J].Nuclear Electronics & Detection Technology,2011,31(5):588-590.

备注/Memo

备注/Memo:
收稿日期:2017-08-21 修回日期:2017-11-14
基金项目:国家自然科学基金联合基金项目(U1537102); 中央高校基本科研业务费专项资金(NS2016004); 航空科学基金(20152852036); 江苏省电力公司科技项目(J2015035); 江苏省产学研联合创新资金(BY2014003-01); 江苏高校优势学科建设工程专项资金
作者简介:徐敏锐(1976-),男,研究员级高级工程师,主要研究方向:电力计量技术,E-mail:xuminrui18@163.com。
引文格式:徐敏锐,曾捷,穆小星,等.特高压电流互感器自动化检定系统设计与应用[J].南京理工大学学报,2017,41(6):730-737.
投稿网址:http://zrxuebao.njust.edu.cn
更新日期/Last Update: 2017-12-31