[1]杜宏宝,蒋 锋,黄振贵,等.内锥型空心弹阻塞临界入口锥角仿真研究[J].南京理工大学学报(自然科学版),2018,42(06):642.[doi:10.14177/j.cnki.32-1397n.2018.42.06.002]
 Du Hongbao,Jiang Feng,Huang Zhengui,et al.Simulation of critical inlet angle of inner conical hollowprojectile under choke flow[J].Journal of Nanjing University of Science and Technology,2018,42(06):642.[doi:10.14177/j.cnki.32-1397n.2018.42.06.002]
点击复制

内锥型空心弹阻塞临界入口锥角仿真研究()
分享到:

《南京理工大学学报》(自然科学版)[ISSN:1005-9830/CN:32-1397/N]

卷:
42卷
期数:
2018年06期
页码:
642
栏目:
出版日期:
2018-12-30

文章信息/Info

Title:
Simulation of critical inlet angle of inner conical hollowprojectile under choke flow
文章编号:
1005-9830(2018)06-0642-05
作者:
杜宏宝1蒋 锋2黄振贵1陈志华1孙晓晖3
1.南京理工大学 瞬态物理国家重点实验室,江苏 南京 210094; 2.上海航天技术研究院,上海 201109; 3.南京理工大学 机械工程学院,江苏 南京 210094
Author(s):
Du Hongbao1Jiang Feng2Huang Zhengui1Chen Zhihua1Sun Xiaohui3
1.National Key Laboratory of Transient Physics,Nanjing University of Science and Technology,Nanjing 210094,China; 2.Shanghai Academy of Spaceflight Technology,Shanghai 201109,China; 3. School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China
关键词:
计算流体力学 内锥型空心弹 阻塞 临界入口锥角 穷举法
Keywords:
computational fluid mechanics inner conical hollow projectile choke critical inlet angle exhaustive method
分类号:
TJ011.2
DOI:
10.14177/j.cnki.32-1397n.2018.42.06.002
摘要:
为了研究内锥型空心弹的阻塞现象与入口锥角的关系,仿真研究了入口锥角对空心弹流场的影响。在喉道与入口截面积比为0.6的条件下,基于可压雷诺时均Navier-Stokes(RANS)方程与单方程Spalart-Allmaras(S-A)湍流模型进行研究。对斜坡流场进行数值仿真,并与实验结果对比,验证了该文方法的可行性。采用该文方法模拟了入口锥角分别为10°和30°条件下,空心弹在来流马赫数为2.5时的流场,发现入口锥角是造成气流阻塞的重要影响因素。在来流马赫数为2.5时,利用穷举法计算了入口锥角为10°~30°的流场变化情况,得到空心弹发生阻塞的临界入口锥角为17.8°。计算了空心弹在来流马赫数为2~4时的临界入口锥角,结果表明临界入口锥角随来流马赫数的增大而增大。
Abstract:
The influence of the inlet angle θ on the fluid field of an inner conical hollow projectile is simulated to study the relationship between the choking and the inlet angle. In the condition of the area ratio of throat to entrance of 0.6,the research is based on the Reynolds-averaged Navier-Stokes(RANS)equation and the one-equation Spalart-Allmaras(S-A)turbulence model. The numerical simulation of the ramp flow field is carried out and compared with the experimental results,and the accuracy of the method proposed here is verified. Under the condition of θ=10 ° and θ=30 °,the flow fields of the hollow projectile at Ma=2.5 are simulated by using this method,and the inlet angle is an important factor on the choking of the air flow in projectiles. The flow fields at θ=10°~30° and Ma=2.5 are calculated by using the exhaustive method,and the results show the critical inlet angle of choking is θ0=17.8°. The θ0 at Ma=2~4 is simulated,and the results show θ0 increases with the increasing Ma.

参考文献/References:

[1] 王雨时. 西方国家的空心弹技术[J]. 弹箭技术,1996,9(3):1-10.
Wang Yushi. Studying progress on hollow projectile technique in the western countries[J]. Projectile & Rocket Technology,1996,9(3):1-10.
[2]李惠昌,杨金耀,祁荣长. 空心弹丸的研究[J]. 兵工学报,1980,1(2):32-41.
Li Huichang,Yang Jinyao,Qi Rongchang. Hollow projec-tile study[J]. Acta Armamentarii,1980,1(2):32-41.
[3]赵强,陈志华. 基于近似模型的空心弹气动外形数值优化[J]. 空气动力学学报,2017,35(3):408-414.
Zhao Qiang,Chen Zhihua. Numerical optimization of aerodynamic configuration of a hollow projectile based on the approximation model[J]. Acta Aerodynamica Sinica,2017,35(3):408-414.
[4]黄振贵,李艳玲,陈志华,等. 空心弹的阻力特性分析与气动外形数值分析[J]. 兵工学报,2013,34(5):535-540.
Huang Zhengui,Li Yanling,Chen Zhihua,et al. Numerical investigations on the drag and aerodynamic characteristics of a hollow projectile[J]. Acta Armamentarii,2013,34(5):535-540.
[5]高旭东,钱建平,王晓鸣,等. 空心弹丸流场数值模拟与阻力特性[J]. 南京理工大学学报,2005,29(2):158-161.
Gao Xudong,Qian Jianping,Wang Xiaoming,et al. Flow field calculation and drag characteristic of hollow projectile[J]. Journal of Nanjing University of Science and Technology,2005,29(2):158-161.
[6]Bry W A,Nunn R H. Drag of a tubular projectile with internal blockage[J]. Journal of Spacecraft & Rockets,1984,21(2):216-217.
[7]Evans J,Wardlaw A B. Prediction of tubular projectile aerodynamics using the ZEUS Euler code[J]. Journal of Spacecraft & Rockets,1989,26(5):314-321.
[8]Nietubicz C J. Navier-Stokes computations for conventional and hollow projectile shapes at transonic velocities[C]//14th Fluid and Plasma Dynamics Conference. Palo Alto,CA,USA:AIAA,1981:23-25.
[9]Xiang Gaoxiang,Wang Chun,Teng Honghui,et al. Study on Mach stems induced by interaction of planar shock waves on two intersecting wedges[J]. Acta Mechanica Sinica,2016,32(3):362-368.
[10]Xiang Gaoxiang,Wang Chun,Teng Honghui,et al. Investigations of three-dimensional shock/shock inter-actions over symmetrical intersecting wedges[J]. AIAA Journal,2016,54(5):1-10.
[11]童秉纲,孔祥言,邓国华. 气体动力学[M]. 北京:高等教育出版社,2012:147-149.
[12]李艳玲. 低阻空心弹的数值设计研究[D]. 南京:南京理工大学瞬态物理国家重点实验室,2012.
[13]李艳玲,陈志华. 口径30mm空心弹真实条件下的气动特性研究[J]. 航空计算技术,2011,41(5):76-80.
Li Yanling,Chen Zhihua. Aerodynamic characteristics of hollow projectile with a diameter of 30mm under real conditions[J]. Aeronautical Computing Technique,2011,41(5):76-80.
[14] 高旭东,钱建平,王晓鸣,等. 基于流场数值模拟的空心弹阻力特性优化方法[J]. 弹箭与制导学报,2004,24(4):161-162,173.
Gao Xudong,Qian Jianping,Wang Xiaoming,et al. Optimization method for drag characteristic of hollow projectile based on CFD[J]. Journal of Projectiles,Rockets,Missiles and Guidance,2004,24(4):161-162,173.
[15]任登凤,谭俊杰,张军. 非结构隐式方法在空心弹丸流场模拟中的应用[J]. 力学与实践,2006,28(5):24-27.
Ren Dengfeng,Tan Junjie,Zhang Jun. Flow field calculation of hollow projectile using implicit method based on unstructured meshes[J]. Mechanics in Engineering,2006,28(5):24-27.
[16]Settles G S,Dodson L J. Hypersonic shock/boundary-layer interaction database[J]. AIAA Journal,1994,32(7):1377-1383.
[17]韩子鹏. 弹箭外弹道学[M]. 北京:北京理工大学出版社,2008:26-28.

相似文献/References:

[1]胡志鹏,刘荣忠,郭锐.两种典型尾翼形状对无伞末敏弹气动特性的影响[J].南京理工大学学报(自然科学版),2012,36(05):739.
 HU Zhi-peng,LIU Rong-zhong,GUO Rui.Effect of Two-tipical Wing Shapes on Aerodynamic Characteristics ofNon-parachute Terminal-sensitive Projectile[J].Journal of Nanjing University of Science and Technology,2012,36(06):739.

备注/Memo

备注/Memo:
收稿日期:2018-01-22 修回日期:2018-09-27
基金项目:中央高校基本科研业务费专项资金(30917012101)
作者简介:杜宏宝(1993-),男,硕士生,主要研究方向:计算流体力学,E-mail:1694904162@qq.com; 通讯作者:黄振贵(1986-),男,博士,讲师,主要研究方向:计算流体力学,E-mail:hzgkeylab@njust.edu.cn。
引文格式:杜宏宝,蒋锋,黄振贵,等. 内锥型空心弹阻塞临界入口锥角仿真研究[J]. 南京理工大学学报,2018,42(6):642-646.
投稿网址:http://zrxuebao.njust.edu.cn
更新日期/Last Update: 2018-12-30